Description
The 2000 Series Model LED is a visual signal warning light for use in hazardous locations requiring ATEX approval. The beacon can produce three light patterns: steady-on, slow flash or rapid flash.
The 2000 Series LED beacon is sealed from dust and water by a nitrile rubber o-ring. All exterior cast aluminum surfaces are finished in powder coat paint and external hardware is manufactured from stainless steel to resist corrosion. Available signal colors are Amber, Blue, Clear, Green, Red and Yellow.
The 2000 Series LED beacon is externally powered by 24VDC or 110-240VAC source. All AC powered units feature a switch mode power supply that accommodates a wide input voltage range without requiring any additional configuration from the user. PLC initiation is compatible without the use of an external relay. Screw type terminal blocks are provided for field wiring on all units.
All variations of the 2000 Series LED beacon feature a four entry fixture to allow cable looping. These cable entries are metric (M20 X 1.5) but other configurations are available upon request.
- 3 remotely selectable flash patterns
- 50,000 hour lamp life
- Six lamp/lens colors: Amber, Blue, Clear, Green, Red and Yellow
- Ex ‘e’ terminal chamber available
- AC and DC voltage ranges
- Approved for use in Zone 1, 2, 21, 22 Atmospheres
- Corrosion resistant powder coat finish
- Stainless steel external hardware
- IP66 enclosure
- ATEX, IECEx and CE Certified
