Description
The WAGO 857-424 isolation amplifier features Current and voltage input signal, Supply voltage: 24 VDC, 6 mm module width.
Specifications
- Configuration options: DIP switch
- Input signal type: Voltage; Current
- Input signal (voltage): 0 … 5 V; 1 … 5 V; 0 … 10 V; 2 … 10 V
- Input signal (current): 0 … 10 mA; 2 … 10 mA; 0 … 20 mA; 4 … 20 mA
- Input resistance (current input): ≤ 50 Ω
- Input resistance (voltage input): ≥ 100 kΩ
- Input current (max.): 50 mA
- Input voltage (max.): 30 V
- Output signal type: Voltage; Current
- Output signal (voltage): 0 … 10 V; 2 … 10 V (calibrated, switchable)
- Output signal (current): 0 … 10 mA; 2 … 10 mA; 0 … 20 mA; 4 … 20 mA (calibrated, switchable)
- Load impedance (voltage output): ≥ 2 kΩ (per channel)
- Load impedance (current output): ≤ 600 Ω Per channel
- Limit frequency: 100 Hz / 1 kHz (configurable via DIP switch)
- Step response (typ.): 5.2 ms (100 Hz); 650 µs (1 kHz)
- Transmission error (typ.): ≤ 0.1 % of upper-range value
- Temperature coefficient: ≤ 0.01 %/K
- Power supply type: 24 VDC (SELV)
- Nominal supply voltage US: 24 VDC
- Supply voltage range: -60 … +30 %
- Current consumption (default): < 27 mA
- Current consumption (max.): < 250 mA (2 x Iout 20 mA; Load impedance: 600 Ω; Us: 9.6 V)
- Rated Voltage: 300 V
- Measurement category per EN/UL 61010-2-030: CAT II (input)
- protection rating: IP20
- Test voltage (input/analog output 1/analog output 2/supply): 3 kVAC; 50 … 60 Hz; 1 min
- Overvoltage category: II
- Pollution degree: 2
- Insulation type (input/analog output1/analog output 2/supply): Reinforced insulation (safe isolation)
- Connection Data — Connection technology: Push-in CAGE CLAMP®
- Connection Data — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Connection Data — Cable type: Shielded cable
- Width: 6 mm / 0.236 inches
- Height: 94 mm / 3.701 inches
- Depth from upper-edge of DIN-rail: 97.8 mm / 3.85 inches
- Mounting type: DIN-35 rail
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 42 g
- Ambient temperature (operation): -40 … +70 °C (Individual arrangement; -40 … +50 °C (block arrangement))
- Ambient temperature (storage): -40 … +85 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 10 K)
- Temperature range of the connection cable (UL): 75 °C
- Relative humidity: 5 … 95 % (non-condensing)
- Operating altitude (max.): 2000 m
- Conformity marking: CE
- EMC immunity to interference: EN 61000-6-2; EN 61326-1; EN 50121-3-2
- EMC emission of interference: EN 61000-6-3; EN 61326-1; EN 50121-3-2
- Standards/specifications: EN 61010-1; EN 50121-3-2
Image shown is representative. Refer to the product specifications for the exact configuration.