null

WAGO 857-734 Solid-state relay module, Nominal input voltage: 24 VDC, Output voltage range: 0 … 30 VDC, Limiting continuous current: 8 A, Module width: 6 mm, gray

$61.95
SKU:
857-734
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 857-734 solid-state relay module features Nominal input voltage: 24 VDC, Output voltage range: 0 … 30 VDC, Limiting continuous current: 8 A, Module width: 6 mm, gray.

Specifications

  • Nominal input voltage UN: 24 VDC (SELV)
  • Input voltage range (low level): 0 … 4 VDC
  • Input voltage range (high level): 16.8 … 30 VDC
  • Nominal input current at UN: 12 mA
  • Power loss (max.) Pl (max.): 0.3 W
  • Circuit type: 2-wire connection
  • Limiting continuous current: 8 A; 6 A (UL)
  • Nominal output voltage: 24 VDC (SELV)
  • Output voltage range: 1 … 30 VDC
  • Voltage drop: ≤ 0.8 VDC
  • Leakage current at rated voltage: ≤ 1 µA
  • Switching current (min.): 10 mA
  • Turn-on time: ≤ 60 µs
  • Turn-off time: ≤ 250 µs
  • Switching frequency: ≤ 500 Hz
  • Status indicator: Yellow LED
  • Rated Voltage: 300 V
  • Overvoltage category: II
  • Pollution degree: 2
  • Dielectric strength (control/load circuit) (AC, 1 min): 3.51 kVrms
  • Insulation type (between adjacent devices of the same type): Double insulation (safe isolation)
  • Insulation type (to adjacent devices of different types): Basic insulation
  • Safety Information: Adjacent devices of the same type are devices of the same design (series) that are arranged next to one another on the DIN-rail with the same orientation. An end stop (249-116) must be fitted to devices of other types for compliance with the reinforced insulation requirements.
  • protection rating: IP20
  • Connection Data — Connection technology: Push-in CAGE CLAMP®
  • Connection Data — Solid conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Fine-stranded conductor; with insulated ferrule: 0.34 … 1.5 mm² / 22 … 16 AWG
  • Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
  • Width: 6 mm / 0.236 inches
  • Height: 94 mm / 3.701 inches
  • Depth from upper-edge of DIN-rail: 81 mm / 3.189 inches
  • Mounting type: DIN-35 rail
  • Mounting position: horizontal (standing/lying); vertical
  • Color: gray
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Weight: 29.4 g
  • Ambient temperature (operation at UN): -25 … +70 °C
  • Ambient temperature UL (operation at UN): -25 … +60 °C
  • Ambient temperature (storage): -40 … +70 °C
  • Processing temperature: -25 … +50 °C
  • Temperature range of connection cable: ≥ (Tambient + 30 K)
  • Relative humidity: 5 … 85 % (no condensation permissible)
  • Operating altitude (max.): 2000 m
  • Standards/specifications: EN 61010-2-201; EN 61373; EN 61000-6-2; EN 61000-6-3; EN 50121-3-2; EN 50121-4
  • WAGO Basic Relay: 857-181

Image shown is representative. Refer to the product specifications for the exact configuration.