null

WAGO 789-665 Ground resistance signaling module, Ground fault alarm via digital output, Supply voltage: 24 VDC, Module width: 18 mm

$89.02
SKU:
789-665
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 789-665 ground resistance signaling module features Ground fault alarm via digital output, Supply voltage: 24 VDC, Module width: 18 mm.

Specifications

  • Nominal supply voltage US: 24 VDC (SELV)
  • Supply voltage range (DC): 18 … 31.2 VDC
  • Current consumption at nominal supply voltage: ≤ 40 mA
  • Power loss Pl: ≤ 1.7 W
  • Current at ground fault (24 VDC) max.: 56 mA
  • Operation status indicator: 1 x LED status OK (green)
  • Signaling: 1 x Iso alarm LED (red); 1 x Iso-Alarm LED 24 V − Ground (yellow); 1 x Iso-Alarm LED 0 V − Ground (yellow); 1 x Iso-OK signal output
  • Switching voltage (max.): 48 VDC (SELV)
  • Continuous current (max.): 500 mA (for general use)
  • Number of Iso OK contacts connected in series (max.): 25 (Limit value type: 1); 32 (Limit value type: 2 and 3) (per IEC 61131)
  • Function: 1 make contact (NO); closed with applied power supply and insulation resistance > limit value
  • Pre-fuse (required): The fuse must be placed in the output circuit of the power supply. The fuse must be adapted to the power supply used and must trip safely in case of a short circuit. The module is designed for use with a 10 A (max. ) fuse or with a 10 ADC (max.) circuit breaker (characteristic B or C).
  • Pollution degree: 2
  • Overvoltage category: II
  • protection rating: IP20
  • Test voltage (supply/Iso OK contact): 1.5 kVAC; 50 … 60 Hz; 1 min
  • MTBF: > 600,000 h (per MIL-HDBK-217F2)
  • Response value for alarm at nominal voltage: 4 kΩ (at US = 24 V; for other US values see diagram for signaling threshold)
  • Response time: 1 s
  • Hysteresis (typ.): 1 kΩ
  • Response time: 10 s
  • Connection 1 — Connection type: X1.x
  • Connection 1 — Connection technology: Push-in CAGE CLAMP®
  • Connection 1 — WAGO connector: picoMAX® eCOM
  • Connection 1 — Solid conductor: 0.25 … 1.5 mm² / 24 … 14 AWG
  • Connection 1 — Fine-stranded conductor: 0.25 … 1.5 mm² / 24 … 14 AWG
  • Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 0.75 mm²
  • Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 1.5 mm²
  • Connection 1 — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
  • Connection 2 — Connection type: X2.x
  • Connection 2 — Connection technology: Push-in CAGE CLAMP®
  • Connection 2 — WAGO connector: picoMAX® eCOM
  • Connection 2 — Solid conductor: 0.2 … 2.5 mm² / 24 … 12 AWG
  • Connection 2 — Fine-stranded conductor: 0.2 … 2.5 mm² / 24 … 14 AWG
  • Connection 2 — Fine-stranded conductor; with insulated ferrule: 0.25 … 1.5 mm²
  • Connection 2 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 2.5 mm²
  • Connection 2 — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
  • Width: 18 mm / 0.71 inches
  • Height: 90 mm / 3.54 inches
  • Depth from upper-edge of DIN-rail: 51 mm / 2.01 inches
  • Mounting type: DIN-35 rail
  • Weight: 47 g
  • Ambient temperature (operation): -40 … +70 °C
  • Ambient temperature (storage): -40 … +85 °C
  • Temperature range of connection cable: ≥ (Tambient + 10 K)
  • Relative humidity: 5 … 95 % (non-condensing)
  • Operating altitude (max.): 3000 m
  • Conformity marking: CE
  • EMC immunity to interference: EN 61000-6-2
  • EMC emission of interference: EN 61000-6-3; EN 61000-6-4
  • Standards/specifications: UL 61010-2-201

Image shown is representative. Refer to the product specifications for the exact configuration.