null

WAGO 885-310 Stud terminal block, lateral marker slots, for DIN-rail 35 x 15 and 35 x 7.5, 3 studs, M10, 120,00 mm², gray

$27.81
SKU:
885-310
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 885-310 stud terminal block features lateral marker slots, for DIN-rail 35 x 15 and 35 x 7.5, 3 studs, M10, 120,00 mm², gray.

Specifications

  • IEC Approvals — Rated voltage (III / 3): 1000 V
  • IEC Approvals — Rated impulse withstand voltage (III / 3): 8 kV
  • IEC Approvals — Rated current: 269 A
  • IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
  • UL Approvals — Approvals per: UL 1059
  • Approvals per: CSA 22.2 No 158
  • Power loss, per pole (potential): 8.683 W
  • Rated current IN for power loss specification: 269 A
  • Resistance value for specified, current-dependent power loss: 0 Ω
  • Connection Data — Clamping units: 2
  • Connection Data — Total number of potentials: 1
  • Connection Data — Number of levels: 1
  • Connection 1 — Connection technology: Bolt-type connection
  • Connection 1 — Actuation Method: Open-end, ring, socket wrench; 17 mm
  • Connection 1 — Connectable conductor materials: Copper
  • Connection 1 — Clamping range: 6 … 120 mm² / 10 AWG … 250 kcmil
  • Connection 1 — Type of cable lugs per DIN 46234: Cable lugs for solder-free connections; Ring type, without insulating sleeve, for copper conductors
  • Connection 1 — Type of cable lugs per DIN 46235: Cable lugs for compression connections; Cover plate type for copper conductors
  • Connection 1 — Thread size: M10
  • Width: 33.8 mm / 1.331 inches
  • Height: 67 mm / 2.638 inches
  • Depth from upper-edge of DIN-rail: 66.7 mm / 2.626 inches
  • Depth: 73.1 mm / 2.878 inches
  • Tightening torque: 10 … 20 Nm
  • Mounting type: DIN-35 rail
  • Marking level: Side marking
  • Color: gray
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Weight: 227.3 g
  • Processing temperature: -35 … +85 °C
  • Continuous operating temperature: -60 … +105 °C
  • Test specification: ; Railway applications –; Rolling stock –; Electronic equipment: DIN EN 50155 (VDE 0115-200):2022-06
  • Test procedure: ; Railway applications – ; Rolling stock equipment – ; Vibration and shock tests: DIN EN 61373 (VDE 0115-0106):2011-04
  • Spectrum/Mounting location: Service life test, Category 1, Class A/B
  • Functional test with noise-like oscillations: Test passed according to Section 8 of the standard
  • Frequency: f1 = 5 Hz to f2 = 150 Hz
  • Acceleration: 0.101g (highest test level used for all axes)
  • Test duration per axis: 10 min.
  • Test directions: X, Y and Z axes
  • Monitoring of contact faults and interruptions: Passed
  • Voltage drop measurement before and after each axis: Passed
  • Simulated service life test through increased levels of noise-like oscillations: Test passed according to Section 9 of the standard
  • Acceleration: 0.572g (highest test level used for all axes)
  • Test duration per axis: 5 h
  • Extended testing: Monitoring of contact faults and interruptions: Passed
  • Extended testing: Voltage drop measurement before and after each axis: Passed
  • Shock test: Test passed according to Section 10 of the standard
  • Shock pulse form: Half sine
  • Acceleration: 5g (highest test level used for all axes)
  • Shock duration: 30 ms
  • Number of shocks (per axis): 3 pos. und 3 neg.
  • Vibration and shock stress for rolling stock equipment: Passed

Image shown is representative. Refer to the product specifications for the exact configuration.