Description
The WAGO 885-108 stud terminal block features lateral marker slots, for DIN-rail 35 x 15 and 35 x 7.5, 1 stud, M8, 50,00 mm², gray.
Specifications
- IEC Approvals — Rated voltage (III / 3): 1000 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 8 kV
- IEC Approvals — Rated current: 150 A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- UL Approvals — Approvals per: UL 1059
- Approvals per: CSA 22.2 No 158
- Power loss, per pole (potential): 4.725 W
- Rated current IN for power loss specification: 150 A
- Resistance value for specified, current-dependent power loss: 0 Ω
- Connection Data — Clamping units: 1
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: Bolt-type connection
- Connection 1 — Actuation Method: Open-end, ring, socket wrench; 13 mm
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Clamping range: 2.5 … 50 mm² / 14 … 1/0 AWG
- Connection 1 — Type of cable lugs per DIN 46234: Cable lugs for solder-free connections; Ring type, without insulating sleeve, for copper conductors
- Connection 1 — Type of cable lugs per DIN 46235: Cable lugs for compression connections; Cover plate type for copper conductors
- Connection 1 — Thread size: M8
- Width: 22.8 mm / 0.898 inches
- Height: 67 mm / 2.638 inches
- Depth from upper-edge of DIN-rail: 56.7 mm / 2.232 inches
- Depth: 63.1 mm / 2.484 inches
- Tightening torque: 6 … 12 Nm
- Mounting type: DIN-35 rail
- Marking level: Side marking
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 46.8 g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C
Image shown is representative. Refer to the product specifications for the exact configuration.