null

WAGO 883-3507 2-conductor ground terminal block, 35 mm², SCREW CLAMP CONNECTION, 35,00 mm², green-yellow

$21.81
SKU:
883-3507
Shipping:
Calculated at Checkout
interval quantity:
20
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 883-3507 2-conductor ground terminal block features 35 mm², SCREW CLAMP CONNECTION, 35,00 mm², green-yellow.

Specifications

  • IEC Approvals — Ratings per: IEC/EN 60947-7-2
  • UL Approvals — Approvals per: UL 1059
  • Approvals per: CSA 22.2 No 158
  • General information — Wiring direction: Side-entry wiring
  • Connection Data — Clamping units: 2
  • Connection Data — Total number of potentials: 1
  • Connection Data — Number of levels: 1
  • Connection Data — Number of jumper slots: 1
  • Connection 1 — Connection technology: Screw connection
  • Connection 1 — Actuation Method: Slot screwdriver; (6.5 x 1.2) mm blade
  • Connection 1 — Connectable conductor materials: Copper; Aluminum
  • Connection 1 — Connectable conductor materials (note): Terminating Aluminum Conductors; Both restrictions and application notes must be observed when terminating aluminum conductors. These instructions can be found in the WAGO Webshop under “Downloads – Documentation – Additional Information: Terminating Aluminum Conductors.”
  • Connection 1 — Nominal cross-section: 35 mm²
  • Connection 1 — Solid conductor: 1.5 … 50 mm² / 16 … 1/0 AWG
  • Connection 1 — Stranded conductor: 1.5 … 50 mm² / 16 … 1/0 AWG
  • Connection 1 — Fine-stranded conductor: 1.5 … 50 mm² / 16 … 1/0 AWG
  • Connection 1 — Fine-stranded conductor; with insulated ferrule: 1.5 … 35 mm² / 16 … 2 AWG
  • Connection 1 — Note (conductor cross-section): Connecting 50 mm² is only possible on a copper DIN 35 x 15 rail (2.3 mm thick).
  • Connection 1 — Strip length: 18 mm / 0.71 inches
  • Connection 1 — Wiring direction: Side-entry wiring
  • Connection 1 — Screw thread: M6
  • Width: 16.1 mm / 0.634 inches
  • Height: 59 mm / 2.323 inches
  • Depth from upper-edge of DIN-rail: 65.5 mm / 2.579 inches
  • Tightening torque: 3.2 … 3.7 Nm
  • Mounting type: DIN-35 rail; DIN-rail 35 x 15
  • Marking level: Side marking
  • Color: green-yellow
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Weight: 85.1 g
  • Continuous operating temperature: -35 … +105 °C

Image shown is representative. Refer to the product specifications for the exact configuration.