Description
The WAGO 883-7007 2-conductor ground terminal block features 70 mm², SCREW CLAMP CONNECTION, 70,00 mm², green-yellow.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60947-7-2
- UL Approvals — Approvals per: UL 1059
- Approvals per: CSA 22.2 No 158
- General information — Wiring direction: Side-entry wiring
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: Screw connection
- Connection 1 — Actuation Method: T-wrench; 4 mm
- Connection 1 — Connectable conductor materials: Copper; Aluminum
- Connection 1 — Connectable conductor materials (note): Terminating Aluminum Conductors; Both restrictions and application notes must be observed when terminating aluminum conductors. These instructions can be found in the WAGO Webshop under “Downloads – Documentation – Additional Information: Terminating Aluminum Conductors.”
- Connection 1 — Nominal cross-section: 70 mm²
- Connection 1 — Solid conductor: 10 … 95 mm² / 8 … 3/0 AWG
- Connection 1 — Stranded conductor: 10 … 95 mm² / 8 … 3/0 AWG
- Connection 1 — Fine-stranded conductor: 10 … 70 mm² / 8 … 2/0 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 10 … 70 mm² / 8 … 2/0 AWG
- Connection 1 — Strip length: 22 mm / 0.87 inches
- Connection 1 — Wiring direction: Side-entry wiring
- Connection 1 — Screw thread: M5
- Width: 20.5 mm / 0.807 inches
- Height: 76.5 mm / 3.012 inches
- Depth from upper-edge of DIN-rail: 84 mm / 3.307 inches
- Tightening torque: 2.5 … 4 Nm
- Design: horizontal type
- Mounting type: DIN-35 x 15 rail; 2.3 mm thick; copper
- Marking level: Side marking
- Color: green-yellow
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 192 g
- Continuous operating temperature: -35 … +105 °C
Image shown is representative. Refer to the product specifications for the exact configuration.