Description
The WAGO 857-820 jUMPFLEX® signal conditioner features KTY, configurable.
Specifications
- Configuration options: DIP switch
- Input signal type: KTY sensors
- Input voltage (max.): ±30 VDC
- Sensor types (KTY): KTY81-110; KTY81-120; KTY81-121; KTY81-122; KTY81-150; KTY81-210; KTY81-220; KTY81-221; KTY81-222; KTY81-250; KTY82-110; KTY82-120; KTY82-121; KTY82-122; KTY82-150; KTY82-220; KTY82-221; KTY82-222; KTY82-250; KTY83-110; KTY83-120; KTY83-121; KTY83-122; KTY83-150; KTY83-151; KTY84-130; KTY84-150; KTY84-151; KTY16; KTY19; ST13; ST20
- Sensor connection: 2-wire
- Output signal type: Current; Voltage
- Output signal (voltage): 0 … 5 V; 1 … 5 V; 0 … 10 V; 2 … 10 V
- Output signal (current): 0 … 10 mA; 2 … 10 mA; 0 … 20 mA; 4 … 20 mA
- Load impedance (voltage output): ≥ 2 kΩ
- Load impedance (current output): ≤ 600 Ω
- Switching voltage (DO) max.: Supply voltage applied
- Continuous current (DO) max.: 100 mA (no internal restriction)
- Step response (typ.): 50 ms
- Transmission error (typ.): ≤ 0.1 % of upper-range value
- Power supply type: 24 VDC
- Nominal supply voltage US: 24 VDC
- Supply voltage range: ±30 %
- Current consumption at nominal supply voltage: ≤ 40 mA (+ IDO)
- protection rating: IP20
- Test voltage (input/output/supply): 2.5 kVAC; 50 Hz; 1 min
- Connection Data — Connection technology: Push-in CAGE CLAMP®
- Connection Data — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Width: 6 mm / 0.236 inches
- Height: 94 mm / 3.701 inches
- Depth from upper-edge of DIN-rail: 97.8 mm / 3.85 inches
- Mounting type: DIN-35 rail
- Color: light gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 35.5 g
- Ambient temperature (operation): -25 … +70 °C
- Ambient temperature (storage): -40 … +85 °C
- Relative humidity: 5 … 95 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Conformity marking: CE
- EMC immunity to interference: EN 61000-6-2
- EMC emission of interference: EN 61000-6-4
- Standards/specifications: DNV
Image shown is representative. Refer to the product specifications for the exact configuration.