Description
The WAGO 857-409 jUMPFLEX® signal conditioner features bipolar isolation amplifier, configurable.
Specifications
- Configuration options: DIP switch; Potentiometer
- Input signal type: Voltage; Current
- Input signal (voltage): ±5 V; 0 … 5 V; 1 … 5 V; ±10 V; 0 … 10 V; 2 … 10 V
- Input signal (current): ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA
- Input resistance (current input): ≤ 50 Ω
- Input resistance (voltage input): 1 MΩ
- Input current (max.): 50 mA
- Input voltage (max.): 32 V
- Zero/span adjustment: ±5 % of upper range value
- Output signal type: Current; Voltage
- Output signal (voltage): ±5 V; 0 … 5 V; 1 … 5 V; ±10 V; 0 … 10 V; 2 … 10 V
- Output signal (current): ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA
- Load impedance (voltage output): ≥ 2 kΩ
- Load impedance (current output): ≤ 600 Ω
- Residual ripple: ≤ 10 mV (rms)
- Limit frequency: 100 Hz / 5 kHz (configurable via DIP switch)
- Step response (typ.): 3.5 ms (100 Hz); 68 µs (5 kHz)
- Transmission error (typ.): ≤ 0.1 % of upper-range value
- Transmission error (max.): ≤ 0.2 % of upper-range value
- Transmission error (under interference): ≤ 15 %
- Temperature coefficient: ≤ 0.01 %/K
- Power supply type: 24 VDC (SELV)
- Nominal supply voltage US: 24 VDC
- Supply voltage range: ±30 %
- Current consumption (default): ≤ 20 mA
- Current consumption (max.): ≤ 40 mA
- Rated Voltage: 300 V
- protection rating: IP20
- Test voltage (input/output/supply): 3 kVAC; 50 Hz; 1 min
- Overvoltage category: II
- Pollution degree: 2
- Insulation type (input/analog output/supply): Functional insulation
- Insulation type (adjacent devices): Reinforced insulation (safe isolation)
- Connection Data — Connection technology: Push-in CAGE CLAMP®
- Connection Data — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Connection Data — Cable type: Shielded cable
- Width: 6 mm / 0.236 inches
- Height: 94 mm / 3.701 inches
- Depth from upper-edge of DIN-rail: 97.8 mm / 3.85 inches
- Mounting type: DIN-35 rail
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 39.2 g
- Ambient temperature (operation): -25 … +70 °C
- Ambient temperature (storage): -40 … +85 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 10 K)
- Relative humidity: 5 … 95 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Conformity marking: CE
- EMC immunity to interference: EN 61000-6-2
- EMC emission of interference: EN 61000-6-3
- Standards/specifications: EN 61010-1; EN 61373; DNV
Image shown is representative. Refer to the product specifications for the exact configuration.