null

WAGO 857-624 Solid-state timer relay module, Nominal input voltage: 24 VDC, Output voltage range: 0 … 24 VDC, Limiting continuous current: 2 A, 2-wire connection, Multifunction/Multitime, Yellow status indicator, Module width: 6 mm

$115.70
SKU:
857-624
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 857-624 solid-state timer relay module features Nominal input voltage: 24 VDC, Output voltage range: 0 … 24 VDC, Limiting continuous current: 2 A, 2-wire connection, Multifunction/Multitime, Yellow status indicator, Module width: 6 mm.

Specifications

  • Nominal input voltage UN: 24 VDC (SELV)
  • Input voltage range: -15 … +30 %
  • Nominal input current at UN: 10 mA
  • Time range: 0.1 … 10 s; 3 … 300 s; 0.3 … 30 min; 3 … 300 min
  • Reset time: 50 ms
  • Repeat accuracy: 1 %
  • Functions: On-delay; Single-shot leading edge; On-delay and single-shot leading edge (1 s fixed); Flashing
  • Circuit type: 2-wire connection
  • Limiting continuous current: 2 A
  • Nominal output voltage: 24 VDC
  • Output voltage range: 0 … 30 VDC
  • Voltage drop: ≤ 0.12 VDC
  • Leakage current at rated voltage: ≤ 1 µA
  • Switching current (min.): 50 µA
  • Turn-on time: ≤ 100 µs
  • Turn-off time: ≤ 2 ms
  • Short circuit protection (load circuit): 2 A; Fast (F); Test based on EN 61812-1 with short-circuit current 100 ADC
  • Status indicator: Yellow LED
  • Rated Voltage: 300 V
  • Rated impulse withstand voltage: 6.4 kV
  • Overvoltage category: II
  • Pollution degree: 2
  • Dielectric strength (control/load circuit) (AC, 1 min): 3.75 kVrms
  • Insulation type (control/load circuit): Reinforced insulation (safe isolation)
  • Insulation type (between adjacent devices of the same type): Double insulation (safe isolation)
  • Insulation type (to adjacent devices of different types): Basic insulation
  • Safety Information: Adjacent devices of the same type are devices of the same design (series) that are arranged next to one another on the DIN-rail with the same orientation. An end stop (249-116) must be fitted to devices of other types for compliance with the reinforced insulation requirements.
  • protection rating: IP20
  • Connection Data — Connection technology: Push-in CAGE CLAMP®
  • Connection Data — Solid conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
  • Width: 6 mm / 0.236 inches
  • Height: 94 mm / 3.701 inches
  • Depth from upper-edge of DIN-rail: 81 mm / 3.189 inches
  • Mounting type: DIN-35 rail
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Weight: 29.5 g
  • Ambient temperature (operation at UN): -20 … +60 °C
  • Ambient temperature (storage): -40 … +70 °C
  • Processing temperature: -25 … +50 °C
  • Temperature range of connection cable: ≥ (Tambient + 15 K)
  • Relative humidity: 5 … 95 % (no condensation permissible)
  • Operating altitude (max.): 2000 m
  • Standards/specifications: EN 61010-2-201; EN 61373
  • WAGO Basic Relay: 857-161

Image shown is representative. Refer to the product specifications for the exact configuration.