Description
The WAGO 857-634 solid-state timer relay module features Nominal input voltage: 24 VDC, Output voltage range: 24 … 230 VAC, Limiting continuous current: 1 A, 2-wire connection, Multifunction/Multitime, Yellow status indicator, Module width: 6 mm.
Specifications
- Nominal input voltage UN: 24 VDC (SELV)
- Input voltage range: -15 … +30 %
- Nominal input current at UN: 10 mA
- Time range: 0.1 … 10 s; 3 … 300 s; 0.3 … 30 min; 3 … 300 min
- Reset time: 50 ms
- Repeat accuracy: 1 %
- Functions: On-delay; Single-shot leading edge; On-delay and single-shot leading edge (1 s fixed); Flashing
- Circuit type: 2-wire connection; Zero-voltage switching
- Limiting continuous current: 1 A
- Nominal output voltage: 230 VAC
- Output voltage range: 24 … 240 VAC
- Voltage drop: ≤ 1 VAC
- Leakage current at rated voltage: ≤ 1.5 mA
- Switching current (min.): 10 mA
- Turn-on time: ≤ 10 ms
- Turn-off time: ≤ 10 ms
- Switching frequency: 50 Hz / 60 Hz
- Status indicator: Yellow LED
- Rated Voltage: 300 V
- Rated impulse withstand voltage: 6.4 kV
- Overvoltage category: II
- Pollution degree: 2
- Dielectric strength (control/load circuit) (AC, 1 min): 3.75 kVrms
- Insulation type (control/load circuit): Reinforced insulation (safe isolation)
- Insulation type (between adjacent devices of the same type): Double insulation (safe isolation)
- Insulation type (to adjacent devices of different types): Basic insulation
- Safety Information: Adjacent devices of the same type are devices of the same design (series) that are arranged next to one another on the DIN-rail with the same orientation. An end stop (249-116) must be fitted to devices of other types for compliance with the reinforced insulation requirements.
- protection rating: IP20
- Connection Data — Connection technology: Push-in CAGE CLAMP®
- Connection Data — Solid conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Width: 6 mm / 0.236 inches
- Height: 94 mm / 3.701 inches
- Depth from upper-edge of DIN-rail: 81 mm / 3.189 inches
- Mounting type: DIN-35 rail
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 29.5 g
- Ambient temperature (operation at UN): -20 … +60 °C
- Ambient temperature (storage): -40 … +70 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 15 K)
- Relative humidity: 5 … 95 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Standards/specifications: EN 61010-2-201; EN 61373
- WAGO Basic Relay: 857-167
Image shown is representative. Refer to the product specifications for the exact configuration.