Description
The WAGO 857-452 jUMPFLEX® signal conditioner features passive isolator, 2-channel.
Specifications
- Configuration options: Pre-configured
- Input signal type: Current; Current
- Input signal (current): 0 … 20 mA; 4 … 20 mA
- Input current (max.): 40 mA
- Input voltage (max.): 20 V
- Response threshold: 200 µA
- Output signal type: Current; Current
- Output signal (current): 0 … 20 mA; 4 … 20 mA
- Load impedance (current output): ≤ 600 Ω Temperature range restrictions may occur.
- Voltage drop: ≤ 2.5 V (at 20 mA at the output)
- Limit frequency: 100 Hz
- Step response (typ.): 3.5 ms
- Transmission error (typ.): ≤ 0.1 % of upper-range value
- Load error: ≤ 0.05 % of upper-range value; per 100 Ω load
- Temperature coefficient: ≤ 0.01 %/K
- Power supply type: Passive (via input)
- Rated Voltage: 300 V
- Measurement category per EN/UL 61010-2-030: CAT II (input)
- Overvoltage category: II
- Pollution degree: 2
- protection rating: IP20
- Test voltage (input/output): 3 kVAC; 50 Hz; 1 min
- Insulation type (input/analog output): Reinforced insulation (safe isolation)
- Connection Data — Connection technology: Push-in CAGE CLAMP®
- Connection Data — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Connection Data — Cable type: Shielded cable
- Width: 6 mm / 0.236 inches
- Height: 94 mm / 3.701 inches
- Depth from upper-edge of DIN-rail: 97.8 mm / 3.85 inches
- Mounting type: DIN-35 rail; DIN-35 rail
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 38.9 g
- Ambient temperature (operation): -25 … +70 °C
- Ambient temperature (storage): -40 … +85 °C
- Temperature range of connection cable: ≥ (Tambient + 15 K)
- Temperature range of the connection cable (UL): 70 °C
- Relative humidity: 5 … 95 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Conformity marking: CE
- EMC immunity to interference: EN 61000-6-2
- EMC emission of interference: EN 61000-6-3
- Standards/specifications: EN 61010-1; DNV
Image shown is representative. Refer to the product specifications for the exact configuration.