Description
EoC 4 port Transceiver/Switch, 100Mbps, Enables 4 IP Devices over Single Coax, Requires eBridge100SPR Transceiver
The eBridge4SPT 4 Port PoE/PoE+ Transceiver Switch is designed for use with eBridge100SPR to deliver data and power over coax cable. eBridge4SPT allows you to upgrade your existing infrastructure by replacing a single analog device with up to four (4) PoE/PoE+ devices. Data transmission and power over the Coax is possible up to 500m. Maximum range from head end to the PoE camera/device is 600m taking into consideration that up to 100m of structured cable may be deployed at each end. eBridge4SK enables cost-effective system upgrades and eliminates the costs and labor associated with installing new network cabling.
Input
Powered by eBridge100SPR (included in eBridge4SK kit).
Power Output
4 ports PoE (15.4W) or PoE+ (30W) per port.
Ethernet
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair Cat-5 or better structured cable.
Distance: up to 100m.
Speed: 10/100BaseT, half/full duplex, auto negotiation.
Coax
Distance: up to 500m.
Connectivity: BNC, RG-59/U or similar.
Throughput is rated to pass 25Mbps of data at distances up to 500m with proper headend equipment which supports Megapixel, HD720, HD1080.
LED Indicators
Blue LED - Coax link connection.
Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
Temperature
Operating Temperature (60W): -40ºC to 75ºC (-40ºF to 167ºF)
Storage Temperature: -40ºC to 75ºC (-40ºF to 167ºF).
Relative humidity: 20 to 85%, non-condensing.
Operating Altitude
- 304.8 to 2000m ( -1000 to 6,561.679 ft.).
