Description
The WAGO 883-1204 2-conductor through terminal block features 120 mm², with screw-type connection, 120,00 mm², blue.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60947-7-1
- IEC Approvals — Rated voltage (III / 3): 1000 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 8 kV
- IEC Approvals — Rated current: 269 A
- IEC Approvals — Current at conductor cross-section (max.) mm²: 290 A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 600 V
- UL Approvals — Rated current UL (Use Group B): 228 A
- UL Approvals — Rated voltage UL (Use Group C): 600 V
- UL Approvals — Rated current UL (Use Group C): 228 A
- UL Approvals — Rated voltage UL (Use Group D): 600 V
- UL Approvals — Rated current UL (Use Group D): 228 A
- Approvals per: CSA 22.2 No 158
- Rated voltage CSA (Use Group B): 600 V
- Rated current CSA (Use Group B): 228 A
- Rated voltage CSA (Use Group C): 600 V
- Rated current CSA (Use Group C): 228 A
- Rated voltage CSA (Use Group D): 600 V
- Rated current CSA (Use Group D): 228 A
- Power loss, per pole (potential): 8.683 W
- Rated current IN for power loss specification: 269 A
- Resistance value for specified, current-dependent power loss: 0 Ω
- General information — Wiring direction: Side-entry wiring
- Connection Data — Clamping units: 2
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection Data — Number of jumper slots: 1
- Connection 1 — Connection technology: Screw connection
- Connection 1 — Actuation Method: T-wrench; 6 mm
- Connection 1 — Connectable conductor materials: Copper; Aluminum
- Connection 1 — Connectable conductor materials (note): Terminating Aluminum Conductors; Both restrictions and application notes must be observed when terminating aluminum conductors. These instructions can be found in the WAGO Webshop under “Downloads – Documentation – Additional Information: Terminating Aluminum Conductors.”
- Connection 1 — Nominal cross-section: 120 mm²
- Connection 1 — Solid conductor: 16 … 150 mm² / 6 AWG … 300 kcmil
- Connection 1 — Stranded conductor: 16 … 150 mm² / 6 AWG … 300 kcmil
- Connection 1 — Fine-stranded conductor: 16 … 120 mm² / 6 AWG … 250 kcmil
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 16 … 95 mm² / 6 … 3/0 AWG
- Connection 1 — Strip length: 27 mm / 1.06 inches
- Connection 1 — Wiring direction: Side-entry wiring
- Connection 1 — Screw thread: M10
- Width: 27 mm / 1.063 inches
- Height: 91 mm / 3.583 inches
- Depth from upper-edge of DIN-rail: 90 mm / 3.543 inches
- Tightening torque: 12 … 20 Nm
- Mounting type: DIN-35 rail; DIN-rail 35 x 7.5
- Marking level: Side marking
- Color: blue
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 280.7 g
- Continuous operating temperature: -35 … +105 °C
Image shown is representative. Refer to the product specifications for the exact configuration.