Description
The WAGO 879-3020 energy meter (MID) features for direct connection, 65A, 3x230/400V, 50Hz, Modbus® and M-Bus, 2 x S0 interface, 4PS.
Specifications
- Configuration options: Touch-sensitive controls; Configuration app via Bluetooth®
- Input signal type: Voltage; Current
- Network configuration: Two-wire, three-wire and four-wire networks
- Reference current Iref: 5 A
- Measured variable: Voltage; Current; Electrical output; Mains frequency
- Nominal input voltage [V]: 3 x 230 … 400 VAC
- Input voltage range: ±20 %
- Input current Ii: ≤ 65 A
- Frequency range: 45 … 60 Hz
- Communications: Modbus®; M-Bus; Bluetooth®
- Interface: RS-485 (2-wire); 2 x S0 interfaces (configurable)
- Indicators: LCD with backlight
- Rate control input: 230 VAC
- Measured variables (calculated): Active and reactive energy in supply and reference direction
- Measurement type (load profile): No
- Measured value acquisition: for direct connection
- Accuracy class: Class B (= 1 % error); Active energy per EN 50470-3
- Calibration validity period: 8 Jahre
- Power supply type: Via measurement circuit
- Power consumption Pmax. (phase; active power): 2 W
- Power consumption Pmax. (phase; apparent power): 10 VA
- Dielectric strength: 4 kV; 1 min
- Impulse withstand voltage (1.2/50 μs): 6 kV
- Pollution degree: 2
- Protection class: II
- protection rating: IP51 / IP20; IP51 (front side); IP20 (connection)
- Connection Data — Connection position: Output top (PS)
- Connection Data — Design: 4PS
- Connection 1 — Connection type: Voltage/current
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — WAGO connector: WAGO 2616 Series
- Connection 1 — Actuation Method: Lever
- Connection 1 — Strip length: 18 … 20 mm / 0.71 … 0.79 inches
- Connection 1 — Solid conductor: 0.75 … 16 mm² / 18 … 4 AWG
- Connection 1 — Fine-stranded conductor: 0.75 … 25 mm² / 18 … 4 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.75 … 16 mm²
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.75 … 16 mm²
- Connection 2 — Connection type: Communication/rate control input
- Connection 2 — Connection technology: Push-in CAGE CLAMP®
- Connection 2 — WAGO connector: WAGO 2604 Series
- Connection 2 — Actuation type: Lever
- Connection 2 — Strip length: 9 … 11 mm / 0.35 … 0.43 inches
- Connection 2 — Solid conductor: 0.2 … 4 mm² / 24 … 12 AWG
- Connection 2 — Fine-stranded conductor: 0.2 … 4 mm² / 24 … 12 AWG
- Connection 2 — Fine-stranded conductor; with insulated ferrule: 0.25 … 2.5 mm²
- Connection 2 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 2.5 mm²
- Width: 72 mm / 2.835 inches
- Height: 140 mm / 5.512 inches
- Depth: 63 mm / 2.48 inches
- Note (dimensions): Height without cover: 92 mm
- Mounting type: DIN-35 rail
- Housing design: DIN-rail-mount enclosure
- Housing material: PC 940A
- Weight: 280 g
- Ambient temperature (operation): -40 … +70 °C
- Relative humidity: ≤ 75 % (for storage ≤ 95 %)
- Conformity marking: CE
- Standards/specifications: EN 50470-1/3
- Accounting guideline: MID
Image shown is representative. Refer to the product specifications for the exact configuration.