null

WAGO 879-3000 Energy meter (MID24), for direct connection, 65A, 3x230/400V, 50Hz, Modbus® and M-Bus, 2 x S0 interface, 4PU

$800.20
SKU:
879-3000
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 879-3000 energy meter (MID24) features for direct connection, 65A, 3x230/400V, 50Hz, Modbus® and M-Bus, 2 x S0 interface, 4PU.

Specifications

  • Configuration options: Touch-sensitive controls; Configuration app via Bluetooth®
  • Input signal type: Voltage; Current
  • Network configuration: Two-wire, three-wire and four-wire networks
  • Reference current Iref: 5 A
  • Measured variable: Voltage; Current; Electrical output; Mains frequency
  • Nominal input voltage [V]: 3 x 230 … 400 VAC
  • Input voltage range: ±20 %
  • Input current Ii: ≤ 65 A
  • Frequency range: 45 … 60 Hz
  • Communications: Modbus®; M-Bus; Bluetooth®
  • Interface: RS-485 (2-wire); 2 x S0 interfaces (configurable)
  • Indicators: LCD with backlight
  • Rate control input: 230 VAC
  • Measured variables (calculated): Active and reactive energy in supply and reference direction
  • Measurement type (load profile): No
  • Measured value acquisition: For direct connection
  • Accuracy class: Class B (= 1 % error); Active energy per EN 50470-3
  • Calibration validity period: 8 Jahre
  • Power supply type: Via measurement circuit
  • Power consumption Pmax. (phase; active power): 2 W
  • Power consumption Pmax. (phase; apparent power): 10 VA
  • Dielectric strength: 4 kV; 1 min
  • Impulse withstand voltage (1.2/50 μs): 6 kV
  • Pollution degree: 2
  • Protection class: II
  • protection rating: IP51 / IP20; IP51 (front side); IP20 (connection)
  • Connection Data — Connection position: Output bottom (PU)
  • Connection Data — Design: 4PU
  • Connection 1 — Connection type: Voltage/current
  • Connection 1 — Connection technology: Push-in CAGE CLAMP®
  • Connection 1 — WAGO connector: WAGO 2616 Series
  • Connection 1 — Actuation Method: Lever
  • Connection 1 — Strip length: 18 … 20 mm / 0.71 … 0.79 inches
  • Connection 1 — Solid conductor: 0.75 … 16 mm² / 18 … 4 AWG
  • Connection 1 — Fine-stranded conductor: 0.75 … 25 mm² / 18 … 4 AWG
  • Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.75 … 16 mm²
  • Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.75 … 16 mm²
  • Connection 2 — Connection type: Communication/rate control input
  • Connection 2 — Connection technology: Push-in CAGE CLAMP®
  • Connection 2 — WAGO connector: WAGO 2604 Series
  • Connection 2 — Actuation type: Lever
  • Connection 2 — Strip length: 9 … 11 mm / 0.35 … 0.43 inches
  • Connection 2 — Solid conductor: 0.2 … 4 mm² / 24 … 12 AWG
  • Connection 2 — Fine-stranded conductor: 0.2 … 4 mm² / 24 … 12 AWG
  • Connection 2 — Fine-stranded conductor; with insulated ferrule: 0.25 … 2.5 mm²
  • Width: 72 mm / 2.835 inches
  • Height: 140 mm / 5.512 inches
  • Depth: 63 mm / 2.48 inches
  • Note (dimensions): Height without cover: 92 mm
  • Mounting type: DIN-35 rail
  • Housing design: DIN-rail-mount enclosure
  • Housing material: PC 940A
  • Weight: 280 g
  • Ambient temperature (operation): -40 … +70 °C
  • Relative humidity: ≤ 75 % (for storage ≤ 95 %)
  • Conformity marking: CE
  • Standards/specifications: EN 50470-1/3
  • Accounting guideline: MID

Image shown is representative. Refer to the product specifications for the exact configuration.