Description
The WAGO 859-801 dC/DC converter features input voltage 24 VDC, output voltage, 5 VDC, 0.5 A.
Specifications
- Nominal input voltage [V]: 24 VDC
- Input voltage range: 10 … 30 VDC
- Nominal mains frequency range: 0 Hz
- Mains failure hold-up time: ≥ 1 ms
- Nominal output voltage [V]: 5 VDC
- Output voltage range: DC 5 V
- Nominal output current Io nom: 0.5 A (Single, 10 mm spacing); 0.4 A (in a row)
- Residual ripple: ≤ 150 mV
- Switching frequency: 20 kHz (nominal)
- Overload behavior: Temporary no damage (short circuit of the output for 1 minute)
- Signaling: 1 x LED
- Efficiency (typ.): 70 %
- Internal fuse: TVS diode
- Protection class: III
- protection rating: IP20; per EN 60529
- Reverse voltage protection: yes
- Pollution degree: 2
- Series operation: No
- Connection Data — Number of jumper slots: 2
- Connection 1 — Connection technology: CAGE CLAMP®
- Connection 1 — WAGO connector: WAGO 859 Series
- Connection 1 — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection 1 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection 1 — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
- Width: 6 mm / 0.236 inches
- Height: 91 mm / 3.583 inches
- Depth from upper-edge of DIN-rail: 56 mm / 2.205 inches
- Housing design: Rail-mount terminal block
- Mounting type: DIN-35 rail
- Color: gray
- Weight: 20 g
- Ambient temperature (operation): -25 … +55 °C
- Conformity marking: CE
Image shown is representative. Refer to the product specifications for the exact configuration.