Description
The WAGO 858-181 basic relay features Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 12 A, with manual operation, Module width: 22 mm, Module height: 35mm.
Specifications
- Nominal input voltage UN: 24 VDC
- Nominal input current at UN: 38 mA
- Number of changeover contacts: 2
- Contact material (relay): AgNi
- Limiting continuous current: 12 A
- Inrush current (resistive) max.: (AC) 24 A / 4 s
- Switching Voltage, Max.: 250 VAC
- Switching power (resistive) max.: AC 3000 VA; DC (see load limit curve)
- Utilization category: AC-15: 1.5 A / 240 VAC; DC-13: 0.1 A / DC 250 V
- Recommended minimum load: 10 V / 5 mA / 300 mW
- Pull-in time (typ.): 13 ms
- Drop-out time (typ.): 3 ms
- Electrical life (NO; resistive load; 23 °C): 100 x 10³ switching operations
- Mechanical life: 20 x 10⁶ switching operations
- Switching frequency with/without load (max.): 20 min-1 / 200 min-1
- Status indicator: Red LED; Mechanical
- Dielectric strength (control/load circuit) (AC, 1 min): 2.5 kVrms
- Dielectric strength (open contact) (AC, 1 min): 1.5 kVrms
- Dielectric strength (load/load circuit) (AC, 1 min): 2.5 kVrms
- protection rating: IP20
- Width: 21.2 mm / 0.835 inches
- Height from the surface: 35.6 mm / 1.402 inches
- Depth: 27.5 mm / 1.083 inches
- Mounting type: Pluggable module
- Weight: 32.9 g
- Ambient temperature (operation at UN): -40 … +70 °C
- Ambient temperature (storage): -40 … +85 °C
- Standards/specifications: EN 61810-1
Image shown is representative. Refer to the product specifications for the exact configuration.