Description
The WAGO 858-150 basic relay features Nominal input voltage: 24 VDC, 4 changeover contacts, Limiting continuous current: 5 A, with manual operation, Module width: 22 mm, Module height: 35mm.
Specifications
- Nominal input voltage UN: 24 VDC
- Nominal input current at UN: 37 mA
- Number of changeover contacts: 4
- Contact material (relay): AgSnO2
- Limiting continuous current: 5 A
- Inrush current (resistive) max.: (AC) 15 A / 4 s
- Switching Voltage, Max.: 250 VAC
- Switching power (resistive) max.: AC 1250 VA; DC (see load limit curve)
- Recommended minimum load: 12 V / 100 mA
- Pull-in time (typ.): 25 ms
- Drop-out time (typ.): 25 ms
- Bounce time (typ.): 4 ms
- Electrical life (NO; resistive load; 23 °C): 100 x 10³ switching operations
- Mechanical life: 20 x 10⁶ switching operations
- Status indicator: Red LED; Mechanical
- Dielectric strength (control/load circuit) (AC, 1 min): 1.5 kVrms
- Dielectric strength (open contact) (AC, 1 min): 1 kVrms
- Dielectric strength (load/load circuit) (AC, 1 min): 1.5 kVrms
- protection rating: IP20
- Width: 21.5 mm / 0.846 inches
- Height from the surface: 35 mm / 1.378 inches
- Depth: 28 mm / 1.102 inches
- Mounting type: Pluggable module
- Weight: 35.2 g
- Ambient temperature (operation at UN): -25 … +70 °C
- Ambient temperature (storage): -40 … +80 °C
- Standards/specifications: EN 61810-1
Image shown is representative. Refer to the product specifications for the exact configuration.