Description
The WAGO 858-100 relay socket features 4 changeover contacts.
Specifications
- Nominal input voltage UN: 5 … 250 VAC/VDC
- Input voltage range: 0 … 250 VAC/VDC
- Nominal frequency range: 50 … 60 Hz
- Number of changeover contacts: 4
- Limiting continuous current: 8 A (4 x); 12 A (2 x)
- Switching Voltage, Max.: 250 VAC; 250 VDC
- Nominal frequency range: ≤60 Hz
- Rated Voltage: 300 V
- Overvoltage category: II
- Pollution degree: 2
- Dielectric strength (control/load circuit) (AC, 1 min): 3 kVrms
- Dielectric strength (open contact) (AC, 1 min): 1 kVrms
- Insulation type (control/load circuit): Reinforced insulation (safe isolation)
- Insulation type (load/load circuit): Basic insulation
- Insulation type (between adjacent devices of the same type): Basic insulation
- protection rating: IP20
- Connection Data — Connection technology: Push-in CAGE CLAMP®
- Connection Data — Solid conductor: 0.34 … 1.5 mm² / 22 … 16 AWG
- Connection Data — Fine-stranded conductor: 0.34 … 1.5 mm² / 22 … 16 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Connection Data — Note (conductor cross-section): 2 x 0.34 … 2 x 1.5 mm² / 1 x 2.5 mm² / 2 x 22 … 2 x 16 AWG
- Width: 31 mm / 1.22 inches
- Height: 97 mm / 3.819 inches
- Depth from upper-edge of DIN-rail: 39 mm / 1.535 inches
- Mounting type: DIN-35 rail
- Weight: 56.8 g
- Ambient temperature (operation at UN): -40 … +70 °C
- Ambient temperature (storage): -40 … +80 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 30 K)
- Relative humidity: 5 … 95 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Standards/specifications: EN 61010-2-201; UR
Image shown is representative. Refer to the product specifications for the exact configuration.