Description
The WAGO 788-100 relay socket features 1 changeover contact, for 15 mm basic relays, gray.
Specifications
- Nominal input voltage UN: 230 VAC/VDC
- Input voltage range: 0 … 250 VAC/VDC
- Nominal input current at UN: 0
- Nominal frequency range: 50 … 60 Hz
- Number of changeover contacts: 1
- Limiting continuous current: 16 A
- Switching Voltage, Max.: 300 VAC
- Nominal frequency range: ≤60 Hz
- Rated Voltage: 300 V
- Overvoltage category: II
- Pollution degree: 3
- Dielectric strength (control/load circuit) (AC, 1 min): 3.6 kVrms
- Dielectric strength (open contact) (AC, 1 min): 1 kVrms
- Dielectric strength (channel/channel) (AC, 1 min.): (depending on relay))
- Insulation type (control/load circuit): Reinforced insulation (safe isolation)
- Insulation type (between adjacent devices of the same type): Basic insulation
- protection rating: IP20
- Connection Data — Connection technology: Push-in CAGE CLAMP®
- Connection Data — Solid conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Width: 15 mm / 0.591 inches
- Height: 86 mm / 3.386 inches
- Depth from upper-edge of DIN-rail: 54 mm / 2.126 inches
- Mounting type: DIN-35 rail
- Color: gray
- Weight: 31.2 g
- Relative temperature index for plastic (RTI per UL): 105 °C
- Ambient temperature (operation at UN): -40 … +70 °C
- Ambient temperature (storage): -40 … +80 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 20 K)
- Relative humidity: 5 … 95 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Standards/specifications: EN 61010-2-201
Image shown is representative. Refer to the product specifications for the exact configuration.