null

WAGO 857-718 Solid-state relay module, Nominal input voltage: 230 V AC/DC, Output voltage range: 24 … 240 VAC, Limiting continuous current: 2 A, 2-wire connection, zero-cross switching, Yellow status indicator, Module width: 6 mm, gray

$65.20
SKU:
857-718
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 857-718 solid-state relay module features Nominal input voltage: 230 V AC/DC, Output voltage range: 24 … 240 VAC, Limiting continuous current: 2 A, 2-wire connection, zero-cross switching, Yellow status indicator, Module width: 6 mm, gray.

Specifications

  • Nominal input voltage UN: 230 VAC/VDC
  • Input voltage range (low level): 0 … 60 VAC/VDC
  • Input voltage range (high level): 200 … 253 VAC/DC
  • Nominal input current at UN: 4 mA
  • Circuit type: 2-wire connection; Zero-voltage switching
  • Limiting continuous current: 2 A
  • Nominal output voltage: 230 VAC
  • Output voltage range: 24 … 240 VAC
  • Voltage drop: ≤ 1.6 VAC
  • Leakage current at rated voltage: ≤ 1.5 mA
  • Switching current (min.): 22 mA
  • Turn-on time: ≤ 10 ms
  • Turn-off time: ≤ 10 ms
  • Switching frequency: 50 Hz / 60 Hz
  • Status indicator: Yellow LED
  • Rated Voltage: 300 V
  • Overvoltage category: III
  • Pollution degree: 2
  • Dielectric strength (control/load circuit) (AC, 1 min): 3.51 kVrms
  • Insulation type (control/load circuit): Reinforced insulation (safe isolation)
  • Insulation type (between adjacent devices of the same type): Reinforced insulation (safe isolation)
  • Insulation type (to adjacent devices of different types): Basic insulation
  • protection rating: IP20
  • Connection Data — Connection technology: Push-in CAGE CLAMP®
  • Connection Data — Solid conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Fine-stranded conductor; with insulated ferrule: 0.34 … 1.5 mm² / 22 … 16 AWG
  • Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
  • Width: 6 mm / 0.236 inches
  • Height: 94 mm / 3.701 inches
  • Depth from upper-edge of DIN-rail: 81 mm / 3.189 inches
  • Mounting type: DIN-35 rail
  • Mounting position: horizontal (standing/lying); vertical
  • Color: gray
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Weight: 29.2 g
  • Ambient temperature (operation at UN): -20 … +60 °C
  • Ambient temperature (storage): -40 … +70 °C
  • Processing temperature: -25 … +50 °C
  • Temperature range of connection cable: ≥ (Tambient + 30 K)
  • Relative humidity: 5 … 85 % (no condensation permissible)
  • Operating altitude (max.): 2000 m
  • Standards/specifications: EN 61000-6-2; EN 61000-6-3; EN 61373; EN 61010-2-201; UL 508
  • WAGO Basic Relay: 857-168

Image shown is representative. Refer to the product specifications for the exact configuration.