null

WAGO 788-730 Solid-state relay module, Nominal input voltage: 24 VDC, Output voltage range: 12 … 275 VAC, Limiting continuous current: 3.5 A, 2-wire connection, zero-cross switching, Green status indicator, Module width: 15 mm, gray

$53.01
SKU:
788-730
Shipping:
Calculated at Checkout
interval quantity:
8
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 788-730 solid-state relay module features Nominal input voltage: 24 VDC, Output voltage range: 12 … 275 VAC, Limiting continuous current: 3.5 A, 2-wire connection, zero-cross switching, Green status indicator, Module width: 15 mm, gray.

Specifications

  • Nominal input voltage UN: 24 VDC
  • Input voltage range (low level): 0 … 3 VDC
  • Input voltage range (high level): 10 … 30 VDC
  • Nominal input current at UN: 20 mA
  • Power loss (max.) Pl (max.): 0.5 W
  • Circuit type: 2-wire connection; Zero-voltage switching
  • Limiting continuous current: 3.5 A; 1.3 A (UL)
  • Nominal output voltage: 230 VAC
  • Output voltage range: 12 … 275 VAC
  • Voltage drop: ≤ 1.1 VAC
  • Switching current (min.): 1 mA
  • Turn-on time: ≤ 10 ms
  • Turn-off time: ≤ 10 ms
  • Switching frequency: 50 Hz / 60 Hz
  • Status indicator: Green LED
  • Rated Voltage: 300 V
  • Overvoltage category: II
  • Pollution degree: 2
  • Dielectric strength (control/load circuit) (AC, 1 min): 3.51 kVrms
  • Insulation type (control/load circuit): Reinforced insulation (safe isolation)
  • Insulation type (between adjacent devices of the same type): Double insulation (safe isolation)
  • Insulation type (to adjacent devices of different types): Basic insulation
  • protection rating: IP20
  • Connection Data — Connection technology: Push-in CAGE CLAMP®
  • Connection Data — Solid conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
  • Width: 15 mm / 0.591 inches
  • Height: 86 mm / 3.386 inches
  • Depth from upper-edge of DIN-rail: 54 mm / 2.126 inches
  • Mounting type: DIN-35 rail
  • Color: gray
  • Weight: 35.4 g
  • Ambient temperature (operation at UN): -25 … +70 °C
  • Ambient temperature UL (operation at UN): -25 … +60 °C
  • Ambient temperature (storage): -40 … +85 °C
  • Processing temperature: -25 … +50 °C
  • Temperature range of connection cable: ≥ (Tambient + 35 K)
  • Relative humidity: ≤ 95 % (no condensation permissible)
  • Operating altitude (max.): 2000 m
  • Standards/specifications: EN 61010-2-201; EN 61000-6-2; EN 61000-6-3; EN 61373
  • WAGO Basic Relay: 788-755

Image shown is representative. Refer to the product specifications for the exact configuration.