Description
The WAGO 788-701 solid-state relay module features Nominal input voltage: 24 VDC, Output voltage range: 3 … 30 VDC, Limiting continuous current: 5 A, 2-wire connection, Red status indicator, Module width: 15 mm, gray.
Specifications
- Nominal input voltage UN: 24 VDC
- Input voltage range (low level): 0 … 2.5 VDC
- Input voltage range (high level): 15 … 30 VDC
- Nominal input current at UN: 10 mA
- Circuit type: 2-wire connection
- Limiting continuous current: 5 A
- Nominal output voltage: 24 VDC
- Output voltage range: 0 … 30 VDC
- Voltage drop: ≤ 0.3 VDC
- Turn-on time: ≤ 50 µs
- Turn-off time: ≤ 600 µs
- Switching frequency: ≤ 100 Hz
- Status indicator: Red LED
- Pollution degree: 2
- Dielectric strength (control/load circuit) (AC, 1 min): 2.5 kVrms
- protection rating: IP20
- Connection Data — Connection technology: Push-in CAGE CLAMP®
- Connection Data — Solid conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Width: 15 mm / 0.591 inches
- Height: 86 mm / 3.386 inches
- Depth from upper-edge of DIN-rail: 64 mm / 2.52 inches
- Mounting type: DIN-35 rail
- Color: gray
- Weight: 47 g
- Ambient temperature (operation at UN): -40 … +70 °C
- Ambient temperature UL (operation at UN): -40 … +40 °C
- Ambient temperature (storage): -40 … +70 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 20 K)
- Standards/specifications: EN 61000-6-2; EN 61000-6-3; EN 61373; EN 61010-2-201; UL 508 (max. 40 °C / 4.7 A)
- WAGO Basic Relay: 788-751
Image shown is representative. Refer to the product specifications for the exact configuration.