null

WAGO 787-2805 DC/DC converter, input voltage 24 VDC, output voltage 12 VDC, 0.5 A

$91.13
SKU:
787-2805
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 787-2805 dC/DC converter features input voltage 24 VDC, output voltage 12 VDC, 0.5 A.

Specifications

  • Nominal input voltage [V]: 24 VDC
  • Input voltage range: 15 … 30 VDC
  • Nominal mains frequency range: 0 Hz
  • Input current Ii: ≤ 0.5 A
  • Inrush current: ≤ 0.5 A (at nominal input voltage)
  • Nominal output voltage [V]: 12 VDC
  • Output voltage range: DC 12 V
  • Nominal output current Io nom: 0.5 A
  • Nominal output power: 6 W
  • Deviation: ≤ 2 %
  • Residual ripple: ≤ 20 mV (peak-to-peak)
  • Signaling: 1 x DC OK LED (green); 1 x Short circuit LED (red); 1 x Active signal output (Ui, max. 4 mA)
  • Operation status indicator: Green LED (Uo); Red LED (short circuit)
  • Power loss Pl: ≤ 0.21 W; ≤ 0.7 W (nominal load)
  • Efficiency (typ.): 90 % (at nominal input voltage and nominal output)
  • Internal fuse: No
  • Protection class: III
  • protection rating: IP20; per EN 60529
  • Reverse voltage protection: yes
  • Resistance to reverse feed: ≤ 16 VDC
  • Pollution degree: 2
  • Short-circuit-protected: Yes
  • Open-circuit-proof: Yes
  • Parallel operation: No
  • Series operation: No
  • MTBF: > 1,800,000 h
  • Connection Data — Number of jumper slots: 8
  • Connection 1 — Connection technology: Push-in CAGE CLAMP®
  • Connection 1 — WAGO connector: WAGO 857 Series
  • Connection 1 — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
  • Connection 1 — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection 1 — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
  • Width: 6 mm / 0.236 inches
  • Height: 94 mm / 3.701 inches
  • Depth from upper-edge of DIN-rail: 97.8 mm / 3.85 inches
  • Mounting type: DIN-35 rail
  • Weight: 48.6 g
  • Ambient temperature (operation): -25 … +70 °C
  • Ambient temperature (storage): -40 … +85 °C
  • Relative humidity: ≤ 95 % (no condensation permissible)
  • Derating: No derating
  • Climatic category: 3K3 (per EN 60721; except for low air pressure)
  • Conformity marking: CE
  • Standards/specifications: EN 61000-6-2; EN 61000-6-3; EN 60950-1; UL 61010-2-201

Image shown is representative. Refer to the product specifications for the exact configuration.