null

WAGO 787-1712 EPSITRON ® ECO power supply, single-phase, 24 VDC, 2.5 A, DIN and chassis mount options

$58.60
SKU:
787-1712
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 787-1712 ePSITRON ® ECO power supply features single-phase, 24 VDC, 2.5 A, DIN and chassis mount options.

Specifications

  • Phases: 1
  • Nominal input voltage [V]: 1 x 100 … 240 VAC
  • Input voltage range: 1 x 90 … 264 VAC; 125 … 375 VDC
  • Nominal mains frequency range: 47 … 63 Hz; 0 Hz
  • Input current Ii: ≤ 0.6 A (230 VAC); ≤ 1.2 A (115 VAC)
  • Inrush current: ≤ 18 A
  • Power factor correction (PFC): Passive
  • Mains failure hold-up time: ≥ 10 ms (230 VAC)
  • Nominal output voltage [V]: 24 VDC (SELV)
  • Output voltage range: DC 24 V
  • Default Setting: 24 VDC
  • Nominal output current Io nom: 2.5 A (24 VDC; 110 … 240 VAC); 2 A (24 VDC; 100 … 240 VAC)
  • Nominal output power: 60 W
  • Deviation: ≤ 1 %
  • Residual ripple: ≤ 200 mV (peak-to-peak)
  • Overload behavior: Constant power (in overload range: 1.05 … 1.4 x Io nom); Shutdown and automatic restart in the event of a short circuit
  • Signaling: 1 x DC OK LED (green)
  • Operation status indicator: Green LED (Uo)
  • Power loss Pl: ≤ 12 W (230 VAC; 24 VDC; 2.5 A)
  • Efficiency (typ.): 88 % (230 VAC; 2.5 ADC)
  • Internal fuse: F 2 A / 250 VAC
  • Pre-fuse (required): An external DC fuse is required for the DC input voltage.
  • Backup fuse (recommended): Circuit breaker: B6, B10
  • Isolation voltage (pri.-sec.): 4.242 kVDC
  • Isolation voltage (pri.-PE): 2.2 kVDC
  • Isolation voltage (sec.-PE): 0.7 kVDC
  • Protection class: I
  • protection rating: IP20; per EN 60529
  • Resistance to reverse feed: ≤ 30 VDC
  • Overvoltage category: II
  • Pollution degree: 2
  • Transient suppression (primary): Varistor
  • Short-circuit-protected: Yes
  • Open-circuit-proof: Yes
  • Parallel operation: Yes
  • Series operation: Yes, for 2 devices of the same type
  • MTBF: > 300,000 h (per IEC 61709)
  • Connection Data — Note (conductor cross-section): 12 AWG: THHN, THWN
  • Connection 1 — Connection type: Input/output
  • Connection 1 — Connection technology: CAGE CLAMP®
  • Connection 1 — WAGO connector: WAGO 236 Series
  • Connection 1 — Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 1 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 1 — Strip length: 6 … 7 mm / 0.24 … 0.28 inches
  • Width: 40 mm / 1.575 inches
  • Height: 90 mm / 3.543 inches
  • Depth from upper-edge of DIN-rail: 99 mm / 3.898 inches
  • Mounting type: DIN-35 rail; Screw mount
  • Weight: 300 g
  • Ambient temperature (operation): -20 … +60 °C
  • Ambient temperature (storage): -25 … +75 °C
  • Relative humidity: 10 … 95 % (no condensation permissible)
  • Derating: -4 %/K (> 45 °C)
  • Climatic category: 3K3 (per EN 60721)
  • Conformity marking: CE
  • Standards/specifications: EN 61204-3; EN 60335-1; EN 62368-1; UL 60950-1; UL 508; SEMI F47

Image shown is representative. Refer to the product specifications for the exact configuration.