Description
The WAGO 770-893 plug for PCBs features straight, 3-pole, Cod. B, pink.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 250 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 4 kV
- IEC Approvals — Rated current: 25 A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- Ratings per UL 1977 — Note for the US market: Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 16 A and voltages up to 600 V. For further information, please contact your local sales office.
- Ratings per UL 1977 — Rated voltage (UL 1977): 600 V
- Ratings per UL 1977 — Rated current UL 1977: 23 A
- Connection Data — Total number of potentials: 3
- Connection 1 — Number of poles: 3
- Connection 1 — Coding: B
- Pin spacing: 10 mm / 0.394 inches
- Width: 27 mm / 1.063 inches
- Height: 29.5 mm / 1.161 inches
- Height from the surface: 26 mm / 1.024 inches
- Depth: 14.6 mm / 0.575 inches
- Solder pin length: 3.5 mm
- Solder pin dimensions: 1 x 0.8 mm
- Drilled hole diameter: 1.5 (-0.1 … +0.1) mm
- Use: Control technology
- Marking: 3 2 1
- Potential Marking: 3 2 1
- Mating force of a plug-in connection: approx. 20 … 70 N (depending on pole number)
- Retention force of a plug-in connection: Locked: > 80 N
- Unmating force of a plug-in connection: Unlocked: approx. 20 … 70 N (depending on pole number)
- Number of mating cycles: 200, without resistive load
- Design: straight
- Contact type (pluggable connector): Male connector/plug
- Connector (connection type): for PCB
- Mismating protection: Yes
- Mating direction to the PCB: 90 °
- Locking lever: Yes
- Locking of plug-in connection: Locking lever
- PCB contact: THT
- Solder pin arrangement: 2 in-line solder pins/pole
- Number of solder pins per potential: 2
- Color: pink
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Copper or copper alloy; surface-treated
- Weight: 6.7 g
- Processing temperature: -5 … +40 °C
- Continuous operating temperature: -35 … +85 °C
- Note on continuous operating temperature: Insulating parts for temperatures ≤ 105 °C
Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.
Image shown is representative. Refer to the product specifications for the exact configuration.