Description
The WAGO 750-670 stepper Controller features RS-422/24 VDC, 20 mA.
Specifications
- Device-specific: Operating modes: Individual positioning, reference run, jog, tip, command tables, PWM
- Number of digital inputs: 2
- Number of outputs: 1 channel (2 differential outputs A1, A2, B1, B2)
- Input filter: 100 µs, software filter can be connected
- Input current (typ.): 2.8 mA
- Output current per channel: 0.03 A
- Output current: short-circuit-protected
- Load type: RS-422, TTL, optocoupler
- Voltage range for signal (0): −3 … +5 VDC
- Voltage range for signal (1): 15 … 30 VDC
- Signal voltage: 5 VDC (internal), 5 … 24 VDC (external)
- Signal frequency (min.): 0 Hz
- Signal frequency (max.): 500000 Hz
- Resolution: 15 bits + 16 bit prescaler
- Stepper resolution: 23 bits + sign bit
- Duty cycle: 50 % (in stepper motor mode)
- Data width: 12-byte input/output
- Function: Absolute/relative positioning, setpoint change on the fly, rotary axis, etc.
- Supply voltage (system): 5 VDC; via data contacts
- Current consumption (system supply): 98 mA
- Supply voltage (field): 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)
- Isolation: 500 V system/field
- Indicators: LED (A-C, G) green: Input 1, Input 2, Power Supply, Enable; LED (E, F) yellow: Run, Run Program Active; LED (H) red: Error
- Number of incoming power jumper contacts: 2
- Number of outgoing power jumper contacts: 2
- Connection Data — Connection technology: inputs / outputs: 8 x CAGE CLAMP®
- Connection Data — Connectable conductor materials: Copper
- Connection Data — Connection type: Inputs/Outputs
- Connection Data — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
- Width: 12 mm / 0.472 inches
- Height: 100 mm / 3.937 inches
- Depth: 67.8 mm / 2.669 inches
- Depth from upper-edge of DIN-rail: 60.6 mm / 2.386 inches
- Mounting type: DIN-35 rail
- Pluggable connector: fixed
- Color: light gray
- Housing material: Polycarbonate; polyamide 6.6
- Weight: 49.9 g
- Conformity marking: CE
- Ambient temperature (operation): 0 … +55 °C
- Ambient temperature (storage): -40 … +85 °C
- Protection type: IP20
- Pollution degree: 2 per IEC 61131-2
- Operating altitude: 0 … 2000 m / 0 … 6562 ft
- Mounting position: Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
- Relative humidity (without condensation): 95 %
- Vibration resistance: Per IEC 60068-2-6
- Shock resistance: 15g per IEC 60068-2-27
- EMC immunity to interference: per EN 61000-6-2
- EMC emission of interference: per EN 61000-6-3
- Exposure to pollutants: Per IEC 60068-2-42 and IEC 60068-2-43
- Permissible pollutant concentration H2S at a relative humidity < 75%: 10 ppm
- Permissible pollutant concentration SO 2 at a relative humidity < 75%: 25 ppm
Image shown is representative. Refer to the product specifications for the exact configuration.