Description
The WAGO 289-725 interface module features with solder pin, Female connector, 9-pole, Double-deck PCB terminal blocks, in mounting carrier, Mating connector for solder connection, 2,50 mm².
Specifications
- Operating voltage: ≤ 30 VAC; ≤ 50 VDC
- Nominal current: 2 A
- Contact resistance (max.): 30 mΩ
- Specialty functions: With solder pin; with shield connection
- Rated Voltage: 50 V
- Pollution degree: 2
- protection rating: IP00
- Dielectric strength (channel/channel) (AC, 1 min.): 1.3 kVrms
- Insulation type: Functional insulation
- Connection Data — Performance level: 2 / 200 mating cycles
- Connection Data — Strain relief: UNC 4-40 stud bolt
- Connection 1 — Pluggable connector: D-subminiature female connector
- Connection 1 — Pole number 1: 9
- Connection 1 — Connection type: System
- Connection 1 — Note (conductor cross-section): 12 AWG: THHN, THWN
- Connection 1 — Mating direction: vertical
- Connection 2 — Design: PCB terminal blocks (double-deck)
- Connection 2 — Pole number: 10
- Connection 2 — Connection type: Field
- Connection 2 — Connection technology: CAGE CLAMP®
- Connection 2 — WAGO connector: WAGO 736 Series
- Connection 2 — Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
- Connection 2 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
- Connection 2 — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
- Width: 33.5 mm / 1.319 inches
- Height: 85 mm / 3.346 inches
- Depth from upper-edge of DIN-rail: 48 mm / 1.89 inches
- Mounting type: DIN-35 rail
- Housing design: Mounting carrier
- Contact material (connector): Au over Ni
- Weight: 50.9 g
- Ambient temperature (operation): -20 … +50 °C
- Ambient temperature (storage): -40 … +70 °C
- Relative humidity: ≤ 85 % (non-condensing)
- Standards/specifications: EN 61010-2-201
Image shown is representative. Refer to the product specifications for the exact configuration.