null

WAGO 289-722 Interface module, with solder pin, Male connector, 25-pole, Double-deck PCB terminal blocks, in mounting carrier, Mating connector for solder connection, 2,50 mm²

$108.70
SKU:
289-722
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 289-722 interface module features with solder pin, Male connector, 25-pole, Double-deck PCB terminal blocks, in mounting carrier, Mating connector for solder connection, 2,50 mm².

Specifications

  • Operating voltage: ≤ 30 VAC; ≤ 50 VDC
  • Nominal current: 2 A
  • Contact resistance (max.): 30 mΩ
  • Specialty functions: With solder pin; with shield connection
  • Rated Voltage: 50 V
  • Pollution degree: 2
  • protection rating: IP00
  • Dielectric strength (channel/channel) (AC, 1 min.): 1.3 kVrms
  • Insulation type: Functional insulation
  • Connection Data — Performance level: 2 / 200 mating cycles
  • Connection Data — Strain relief: UNC 4-40 stud bolt
  • Connection 1 — Pluggable connector: D-subminiature male connector
  • Connection 1 — Pole number 1: 25
  • Connection 1 — Connection type: System
  • Connection 1 — Note (conductor cross-section): 12 AWG: THHN, THWN
  • Connection 1 — Mating direction: vertical
  • Connection 2 — Design: PCB terminal blocks (double-deck)
  • Connection 2 — Pole number: 26
  • Connection 2 — Connection type: Field
  • Connection 2 — Connection technology: CAGE CLAMP®
  • Connection 2 — WAGO connector: WAGO 736 Series
  • Connection 2 — Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 2 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 2 — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
  • Width: 69 mm / 2.717 inches
  • Height: 85 mm / 3.346 inches
  • Depth from upper-edge of DIN-rail: 48 mm / 1.89 inches
  • Mounting type: DIN-35 rail
  • Housing design: Mounting carrier
  • Contact material (connector): Au over Ni
  • Weight: 96.9 g
  • Ambient temperature (operation): -20 … +50 °C
  • Ambient temperature (storage): -40 … +70 °C
  • Relative humidity: ≤ 85 % (non-condensing)
  • Standards/specifications: EN 61010-2-201

Image shown is representative. Refer to the product specifications for the exact configuration.