Description
The WAGO 289-196 interface module features RJ-45, with power jumper contacts, PCB terminal blocks, Cat. 5.
Specifications
- Operating voltage: ≤ 48 VDC
- Nominal current: 1.5 A
- Insulation resistance: ≥ 500 MΩ
- Specialty functions: Passive PoE injector; With LED, fuse
- Dielectric strength (contact/contact) (AC, 1 min): 1 kVeff
- Connection Data — Mating cycles: 500
- Connection Data — Transmission length (max.): 100 m
- Connection Data — Connection Cable: Cat. 5 (min.)
- Connection 1 — Pluggable connector: RJ-45 (shielded)
- Connection 1 — Pole number 1: 8
- Connection 1 — Connection type: System
- Connection 2 — Connector: RJ-45 (shielded)
- Connection 2 — Pole number: 8
- Connection 2 — Connection type: System
- Connection 3 — Pole number: 4
- Connection 3 — Connection type: Power supply
- Connection 3 — Connection technology: Push-in CAGE CLAMP®
- Connection 3 — WAGO connector: WAGO 250 Series
- Connection 3 — Solid conductor: 0.2 … 1.5 mm² / 24 … 16 AWG
- Connection 3 — Fine-stranded conductor: 0.2 … 1.5 mm² / 24 … 16 AWG
- Connection 3 — Strip length: 8.5 … 9.5 mm / 0.33 … 0.37 inches
- Width: 20.5 mm / 0.807 inches
- Height: 85 mm / 3.346 inches
- Depth from upper-edge of DIN-rail: 51 mm / 2.007 inches
- Mounting type: DIN-35 rail
- Housing design: Mounting carrier
- Mating cycles: 500
- Weight: 32 g
- Ambient temperature (operation): 0 … +70 °C
- Ambient temperature (storage): -40 … +85 °C
- Relative humidity: ≤ 85 % (non-condensing)
Image shown is representative. Refer to the product specifications for the exact configuration.