Description
The WAGO 289-179 interface module features RJ-45, with power jumper contacts, PCB terminal blocks, double-row, Cat. 5, in mounting carrier, with shield connection, with shield clamping saddle, 1,50 mm².
Specifications
- Operating voltage: ≤ 35 VAC; ≤ 50 VDC
- Nominal current: 2.1 A
- Insulation resistance: ≥ 500 MΩ
- Specialty functions: With power jumper contacts; with shield connection; With shield clamping saddle
- Dielectric strength (contact/contact) (AC, 1 min): 1 kVeff
- Connection Data — Mating cycles: 1,000
- Connection Data — Transmission length (max.): 100 m
- Connection Data — Connection Cable: Cat. 5 (min.)
- Connection Data — WAGO shield clamping saddle: 11 mm wide; cable diameter up to 8 mm
- Connection 1 — Pluggable connector: Shielded RJ-45; with two additional power jumper contacts
- Connection 1 — Pole number 1: 10
- Connection 1 — Connection type: System
- Connection 2 — Design: PCB terminal blocks (double-row)
- Connection 2 — Pole number: 11
- Connection 2 — Connection type: System
- Connection 2 — Connection technology: CAGE CLAMP®
- Connection 2 — WAGO connector: WAGO 739 Series
- Connection 2 — Solid conductor: 0.08 … 1.5 mm² / 28 … 14 AWG
- Connection 2 — Fine-stranded conductor: 0.08 … 1.5 mm² / 28 … 14 AWG
- Connection 2 — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
- Width: 30 mm / 1.181 inches
- Height: 85 mm / 3.346 inches
- Depth from upper-edge of DIN-rail: 67 mm / 2.638 inches
- Mounting type: DIN-35 rail
- Housing design: Mounting carrier
- Mating cycles: 1,000
- Weight: 52.5 g
- Ambient temperature (operation): -40 … +85 °C (Actuation: -35 … +85 °C)
- Ambient temperature (storage): -40 … +85 °C
- Relative humidity: ≤ 85 % (non-condensing)
Image shown is representative. Refer to the product specifications for the exact configuration.