Description
The WAGO 2601-1306 pCB terminal block features lever, 1.5 mm², Pin spacing 7.5 mm, 6-pole, Push-in CAGE CLAMP®, 1,50 mm², gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 500 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 6 kV
- IEC Approvals — Rated voltage (III/2): 1000 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 6 kV
- IEC Approvals — Nominal voltage (II/2): 1000 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 6 kV
- IEC Approvals — Rated current: 17.5 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300 V
- UL Approvals — Rated current UL (Use Group B): 15 A
- UL Approvals — Rated voltage UL (Use Group C): 150 V
- UL Approvals — Rated current UL (Use Group C): 15 A
- UL Approvals — Rated voltage UL (Use Group D): 300 V
- UL Approvals — Rated current UL (Use Group D): 10 A
- Approvals per: CSA
- Rated voltage CSA (Use Group B): 300 V
- Rated current CSA (Use Group B): 15 A
- Rated voltage CSA (Use Group C): 150 V
- Rated current CSA (Use Group C): 15 A
- Rated voltage CSA (Use Group D): 300 V
- Rated current CSA (Use Group D): 10 A
- Connection Data — Clamping units: 6
- Connection Data — Total number of potentials: 6
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Lever
- Connection 1 — Solid conductor: 0.14 … 2.5 mm² / 26 … 14 AWG
- Connection 1 — Solid conductor; push-in termination: 0.5 … 2.5 mm² / 22 … 14 AWG
- Connection 1 — Fine-stranded conductor: 0.14 … 1.5 mm² / 26 … 14 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 0.75 mm²
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 1.5 mm²
- Connection 1 — Note (conductor cross-section): For conductors (26 AWG) that are not rigid enough, the clamping unit must be opened using a lever.
- Connection 1 — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
- Connection 1 — Conductor connection direction to PCB: 0 °
- Connection 1 — Number of poles: 6
- Pin spacing: 7.5 mm / 0.295 inches
- Width: 44.8 mm / 1.762 inches
- Height: 16.35 mm / 0.644 inches
- Height from the surface: 12.75 mm
- Depth: 16.58 mm / 0.653 inches
- Solder pin length: 3.6 mm
- Solder pin dimensions: 1 x 0.5 mm
- Drilled hole diameter: 1.2 (+0.1) mm
- PCB contact: THT
- Solder pin arrangement: within the terminal block (in-line)
- Number of solder pins per potential: 2
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 6.7 g
- Limit temperature range: -60 … +105 °C
- Ambient temperature (installation): -35 … +60 °C
- Processing temperature: -35 … +60 °C
- Continuous operating temperature: -60 … +105 °C
Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.
Image shown is representative. Refer to the product specifications for the exact configuration.