null

WAGO 2601-1305 PCB terminal block, lever, 1.5 mm², Pin spacing 7.5 mm, 5-pole, Push-in CAGE CLAMP®, 1,50 mm², gray

$3.40
SKU:
2601-1305
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 2601-1305 pCB terminal block features lever, 1.5 mm², Pin spacing 7.5 mm, 5-pole, Push-in CAGE CLAMP®, 1,50 mm², gray.

Specifications

  • IEC Approvals — Ratings per: IEC/EN 60664-1
  • IEC Approvals — Rated voltage (III / 3): 500 V
  • IEC Approvals — Rated impulse withstand voltage (III / 3): 6 kV
  • IEC Approvals — Rated voltage (III/2): 1000 V
  • IEC Approvals — Rated impulse withstand voltage (III/2): 6 kV
  • IEC Approvals — Nominal voltage (II/2): 1000 V
  • IEC Approvals — Rated impulse withstand voltage (II/2): 6 kV
  • IEC Approvals — Rated current: 17.5 A
  • IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
  • UL Approvals — Approvals per: UL 1059
  • UL Approvals — Rated voltage UL (Use Group B): 300 V
  • UL Approvals — Rated current UL (Use Group B): 15 A
  • UL Approvals — Rated voltage UL (Use Group C): 150 V
  • UL Approvals — Rated current UL (Use Group C): 15 A
  • UL Approvals — Rated voltage UL (Use Group D): 300 V
  • UL Approvals — Rated current UL (Use Group D): 10 A
  • Approvals per: CSA
  • Rated voltage CSA (Use Group B): 300 V
  • Rated current CSA (Use Group B): 15 A
  • Rated voltage CSA (Use Group C): 150 V
  • Rated current CSA (Use Group C): 15 A
  • Rated voltage CSA (Use Group D): 300 V
  • Rated current CSA (Use Group D): 10 A
  • Connection Data — Clamping units: 5
  • Connection Data — Total number of potentials: 5
  • Connection Data — Number of connection types: 1
  • Connection Data — Number of levels: 1
  • Connection 1 — Connection technology: Push-in CAGE CLAMP®
  • Connection 1 — Actuation Method: Lever
  • Connection 1 — Solid conductor: 0.14 … 2.5 mm² / 26 … 14 AWG
  • Connection 1 — Solid conductor; push-in termination: 0.5 … 2.5 mm² / 22 … 14 AWG
  • Connection 1 — Fine-stranded conductor: 0.14 … 1.5 mm² / 26 … 14 AWG
  • Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 0.75 mm²
  • Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 1.5 mm²
  • Connection 1 — Note (conductor cross-section): For conductors (26 AWG) that are not rigid enough, the clamping unit must be opened using a lever.
  • Connection 1 — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
  • Connection 1 — Conductor connection direction to PCB: 0 °
  • Connection 1 — Number of poles: 5
  • Pin spacing: 7.5 mm / 0.295 inches
  • Width: 37.3 mm / 1.467 inches
  • Height: 16.35 mm / 0.644 inches
  • Height from the surface: 12.75 mm
  • Depth: 16.58 mm / 0.653 inches
  • Solder pin length: 3.6 mm
  • Solder pin dimensions: 1 x 0.5 mm
  • Drilled hole diameter: 1.2 (+0.1) mm
  • PCB contact: THT
  • Solder pin arrangement: within the terminal block (in-line)
  • Number of solder pins per potential: 2
  • Color: gray
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Contact material: Electrolytic copper (ECu)
  • Weight: 5.5 g
  • Limit temperature range: -60 … +105 °C
  • Processing temperature: -35 … +60 °C
  • Continuous operating temperature: -60 … +105 °C

Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.

Image shown is representative. Refer to the product specifications for the exact configuration.