null

WAGO 2110-5207 2-conductor ground terminal block, with lever and push-button, 10 mm², with test port, side and center marking, for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 10,00 mm², green-yellow

$14.66
SKU:
2110-5207
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 2110-5207 2-conductor ground terminal block features with lever and push-button, 10 mm², with test port, side and center marking, for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 10,00 mm², green-yellow.

Specifications

  • Reference to hazardous areas: See “Downloads – Documentation – Additional Information: Technical Section; Technical Explications”
  • General information — Wiring direction: Front-entry wiring
  • Connection Data — Clamping units: 2
  • Connection Data — Total number of potentials: 1
  • Connection Data — Number of levels: 1
  • Connection Data — Number of jumper slots: 2
  • Connection 1 — Connection technology: Push-in CAGE CLAMP®
  • Connection 1 — Actuation Method: Lever
  • Connection 1 — Connectable conductor materials: Copper
  • Connection 1 — Nominal cross-section: 10 mm²
  • Connection 1 — Solid conductor: 0.5 … 16 mm² / 20 … 6 AWG
  • Connection 1 — Solid conductor; push-in termination: 4 … 16 mm² / 14 … 6 AWG
  • Connection 1 — Stranded conductor: 0.5 … 16 mm² / 20 … 6 AWG
  • Connection 1 — Fine-stranded conductor: 0.5 … 16 mm² / 20 … 6 AWG
  • Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.5 … 10 mm² / 20 … 8 AWG
  • Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 4 … 10 mm² / 12 … 8 AWG
  • Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination. ; AWG specifications were converted according to IEC.
  • Connection 1 — Strip length: 17 … 19 mm / 0.67 … 0.75 inches
  • Connection 1 — Wiring direction: Front-entry wiring
  • Connection 2 — Actuation type: Push-button
  • Width: 10 mm / 0.394 inches
  • Height: 89 mm / 3.504 inches
  • Depth from upper-edge of DIN-rail: 36.9 mm / 1.453 inches
  • Mounting type: DIN-35 rail
  • Marking level: Center/side marking
  • Color: green-yellow
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Actuator color: orange
  • Weight: 37.6 g
  • Processing temperature: -35 … +85 °C
  • Continuous operating temperature: -60 … +105 °C

Image shown is representative. Refer to the product specifications for the exact configuration.