Description
The WAGO 2110-1207 2-conductor ground terminal block features with lever and Push-in CAGE CLAMP®, 10 mm², with test port, side and center marking, for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 10,00 mm², green-yellow.
Specifications
- Reference to hazardous areas: See “Downloads – Documentation – Additional Information: Technical Section; Technical Explications”
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 2
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection Data — Number of jumper slots: 2
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Lever
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Nominal cross-section: 10 mm²
- Connection 1 — Solid conductor: 0.5 … 16 mm² / 20 … 6 AWG
- Connection 1 — Solid conductor; push-in termination: 4 … 16 mm² / 14 … 6 AWG
- Connection 1 — Stranded conductor: 0.5 … 16 mm² / 20 … 6 AWG
- Connection 1 — Fine-stranded conductor: 0.5 … 16 mm² / 20 … 6 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.5 … 10 mm² / 20 … 8 AWG
- Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 4 … 10 mm² / 12 … 8 AWG
- Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination. ; AWG specifications were converted according to IEC.
- Connection 1 — Strip length: 17 … 19 mm / 0.67 … 0.75 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Connection 2 — Actuation type: Operating tool
- Width: 10 mm / 0.394 inches
- Height: 89 mm / 3.504 inches
- Depth from upper-edge of DIN-rail: 36.9 mm / 1.453 inches
- Depth: 43.7 mm / 1.72 inches
- Mounting type: DIN-35 rail
- Marking level: Center/side marking
- Color: green-yellow
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Actuator color: orange
- Weight: 37.4 g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C
Image shown is representative. Refer to the product specifications for the exact configuration.