Description
The WAGO 2016-7601 TOPJOB® S 2-conductor supply terminal blocks for distribution boxes features 16 mm², side and center marking, for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 16,00 mm², gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60947-7-1
- IEC Approvals — Rated voltage (III / 3): 800V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 8kV
- IEC Approvals — Rated current: 76A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- Power loss, per pole (potential): 2.426W
- Rated current IN for power loss specification: 76A
- Resistance value for specified, current-dependent power loss: 0Ω
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 2
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection Data — Number of jumper slots: 2
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Nominal cross-section: 16 mm²
- Connection 1 — Solid conductor: 0.5 … 16 mm² / 20 … 6 AWG
- Connection 1 — Solid conductor; push-in termination: 6 … 16 mm² / 14 … 6 AWG
- Connection 1 — Fine-stranded conductor: 0.5 … 25 mm² / 20 … 4 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.5 … 16 mm² / 20 … 6 AWG
- Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 6 … 16 mm² / 10 … 6 AWG
- Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination. ; AWG specifications were converted according to IEC.
- Connection 1 — Strip length: 18 … 20 mm / 0.71 … 0.79 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Width: 12 mm / 0.472 inches
- Height: 85.7 mm / 3.374 inches
- Depth from upper-edge of DIN-rail: 40.8 mm / 1.606 inches
- Mounting type: DIN-35 rail
- Marking level: Center/side marking
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 29.4g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C