Description
The WAGO 2016-7607 TOPJOB® S 2-conductor ground terminal block features 16 mm², side and center marking, for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 16,00 mm², green-yellow.
Specifications
- Ratings per IEC/EN – Notes — Rated current (note): 15 mm high DIN-35 rails shall be used for a current load higher than 76 A!
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 2
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection Data — Number of jumper slots: 2
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Nominal cross-section: 16 mm²
- Connection 1 — Solid conductor: 0.5 … 16 mm² / 20 … 6 AWG
- Connection 1 — Solid conductor; push-in termination: 6 … 16 mm² / 14 … 6 AWG
- Connection 1 — Fine-stranded conductor: 0.5 … 25 mm² / 20 … 4 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.5 … 16 mm² / 20 … 6 AWG
- Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 6 … 16 mm² / 10 … 6 AWG
- Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination. ; AWG specifications were converted according to IEC.
- Connection 1 — Strip length: 18 … 20 mm / 0.71 … 0.79 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Width: 12 mm / 0.472 inches
- Height: 85.7 mm / 3.374 inches
- Depth from upper-edge of DIN-rail: 40.8 mm / 1.606 inches
- Mounting type: DIN-35 rail
- Marking level: Center/side marking
- Color: green-yellow
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 43.6g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C