Description
SICK 7102172 ARS20-G7500360.
Performance
- Number of steps per revolution (max. resolution): 360
- Measuring step deviation: 0.005° binary number of steps; 0.016° non-binary number of steps
- Error limits G: 0.035° (binary number of steps) 1); 0.046° (non-binary number of steps) 2)
- Repeatability standard deviation σr: 0.005°
1) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.
2) In accordance with DIN ISO 55350-13; 68.3% of the measured values are inside the specified area.
Interfaces
- Communication interface: Parallel data world
- Initialization time: 40 ms
- Code type: Gray, trimmed
- Code sequence parameter adjustable: CW (clockwise) 1)
- Measured value backlash: 0.005°
- Response threshold: 0.003°
1) Increasing when viewing the clockwise rotating shaft.
Electrical data
- Connection type: Male connector, MS, 19-pin, radial
- Supply voltage: 10 ... 30 V
- Operating current: Typ. 90 mA
- Switching level of control inputs: Logic H = 0.7 x US, Logic L = 0 V ... 0.3 x US
- Actuation of set button: ≥ 100 ms 1)
1) Only with shaft stationary (note initialisation time).
Mechanical data
- Mechanical design: Solid shaft, Servo flange
- Shaft diameter: 3/8″
- Weight (technical data): Approx. 0.22 kg 1)
- Start up torque: 3.4 Ncm
- Operating torque: 2.6 Ncm
- Permissible shaft loading: 20 N (radial); 10 N (axial)
- Operating speed: ≤ 6,000 min⁻¹ with shaft seal; ≤ 10,000 min⁻¹ without shaft seal
- Moment of inertia of the rotor: 54 gcm²
- Bearing lifetime: 3.6 x 109 revolutions
- Angular acceleration: ≤ 500,000 rad/s²
1) Based on encoder with male connector.
Ambient data
- EMC: According to EN 61000-6-2 and EN 61000-6-3
- Enclosure rating: IP65 (IEC 60529) 1)
- Permissible relative humidity: 90 % (Condensation not permitted)
- Operating temperature range: –20 °C ... +85 °C
- Storage temperature range: –40 °C ... +100 °C
- Resistance to shocks: 50 g, 11 ms (EN 60068-2-27)
- Resistance to vibration: 20 g, 10 Hz ... 150 Hz (EN 60068-2-6)
1) With mating connector fitted.
Certificates
- EU declaration of conformity: ✔
- UK declaration of conformity: ✔
Image is representative and may differ from the supplied item.