null

SICK 7101951 ARS20-F6432768, 32,768 (15 bit), Male connector, MS, 23-pin, radial, 10 ... 30 V

$1,179.00
SKU:
7101951
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

SICK 7101951 ARS20-F6432768.

Performance

  • Number of steps per revolution (max. resolution): 32,768 (15 bit)
  • Measuring step deviation: 0.005° binary number of steps; 0.016° non-binary number of steps
  • Error limits G: 0.035° (binary number of steps) 1); 0.046° (non-binary number of steps) 2)
  • Repeatability standard deviation σr: 0.005°

1) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.

2) In accordance with DIN ISO 55350-13; 68.3% of the measured values are inside the specified area.

Interfaces

  • Communication interface: Parallel data world
  • Initialization time: 40 ms
  • Code type: Gray
  • Code sequence parameter adjustable: CW (clockwise) 1)
  • Measured value backlash: 0.005°
  • Response threshold: 0.003°

1) Increasing when viewing the clockwise rotating shaft.

Electrical data

  • Connection type: Male connector, MS, 23-pin, radial
  • Supply voltage: 10 ... 30 V
  • Operating current: Typ. 90 mA
  • Switching level of control inputs: Logic H = 0.7 x US, Logic L = 0 V ... 0.3 x US
  • Actuation of set button: ≥ 100 ms 1)

1) Only with shaft stationary (note initialisation time).

Mechanical data

  • Mechanical design: Solid shaft, Servo flange
  • Shaft diameter: 3/8″
  • Weight (technical data): Approx. 0.22 kg 1)
  • Start up torque: 3.4 Ncm
  • Operating torque: 2.6 Ncm
  • Permissible shaft loading: 20 N (radial); 10 N (axial)
  • Operating speed: ≤ 6,000 min⁻¹ with shaft seal; ≤ 10,000 min⁻¹ without shaft seal
  • Moment of inertia of the rotor: 54 gcm²
  • Bearing lifetime: 3.6 x 109 revolutions
  • Angular acceleration: ≤ 500,000 rad/s²

1) Based on encoder with male connector.

Ambient data

  • EMC: According to EN 61000-6-2 and EN 61000-6-3
  • Enclosure rating: IP65 (IEC 60529) 1)
  • Permissible relative humidity: 90 % (Condensation not permitted)
  • Operating temperature range: –20 °C ... +85 °C
  • Storage temperature range: –40 °C ... +100 °C
  • Resistance to shocks: 50 g, 11 ms (EN 60068-2-27)
  • Resistance to vibration: 20 g, 10 Hz ... 150 Hz (EN 60068-2-6)

1) With mating connector fitted.

Image is representative and may differ from the supplied item.

Download SICK product specification sheet (PDF)