null

SICK 1037021 DFS60E-BBEK02000 Incremental encoders, Cable, 8-wire, universal, 1.5 m, 10 ... 32 V

$527.00
SKU:
1037021
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

SICK 1037021 DFS60E-BBEK02000 Incremental encoders.

Safety-related parameters

  • MTTFD (mean time to dangerous failure): 300 years (EN ISO 13849-1) 1)

1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

Performance

  • Pulses per revolution: 2,000 1)
  • Measuring step: 90°, electric/pulses per revolution
  • Measuring step deviation at non binary number of lines: ± 0.2°
  • Error limits: ± 0.3°

1) See maximum revolution range.

Interfaces

  • Communication interface: Incremental
  • Communication Interface detail: HTL / Push pull
  • Number of signal channels: 6-channel
  • Initialization time: 40 ms
  • Output frequency: ≤ 300 kHz
  • Load current: ≤ 30 mA
  • Power consumption: ≤ 0.5 W (without load)

Electronics

  • Connection type: Cable, 8-wire, universal, 1.5 m 1)
  • Supply voltage: 10 ... 32 V
  • Reference signal, number: 1
  • Reference signal, position: 90°, electric, logically gated with A and B
  • Reverse polarity protection: ✔
  • Short-circuit protection of the outputs: ✔ 2)

1) The universal cable connection is positioned so that it is possible to lay it without bends in a radial or axial direction.

2) Short-circuit opposite to another channel, US or GND permissable for maximum 30 s.

Mechanics

  • Mechanical design: Blind hollow shaft
  • Shaft diameter: 8 mm; Front clamp
  • Weight (technical data): + 0.2 kg
  • Shaft material: Stainless steel
  • Flange material: Aluminum
  • Housing material: Aluminum die cast
  • Start up torque: 0.8 Ncm (+20 °C)
  • Operating torque: 0.6 Ncm (+20 °C)
  • Permissible movement static: ± 0.3 mm (radial); ± 0.5 mm (axial)
  • Permissible movement dynamic: ± 0.1 mm (radial); ± 0.2 mm (axial)
  • Operating speed: ≤ 6,000 min⁻¹ 1)
  • Moment of inertia of the rotor: 40 gcm²
  • Bearing lifetime: 3.6 x 10^10 revolutions
  • Angular acceleration: ≤ 500,000 rad/s²

1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.

Ambient data

  • EMC: According to EN 61000-6-2 and EN 61000-6-4
  • Enclosure rating: IP67, housing side, cable connection (IEC 60529); IP65, shaft side (IEC 60529)
  • Permissible relative humidity: 90 % (Condensation not permitted)
  • Operating temperature range: 0 °C ... +85 °C
  • Storage temperature range: –40 °C ... +100 °C, without package
  • Resistance to shocks: 50 g, 6 ms (EN 60068-2-27)
  • Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)

Certificates

  • EU declaration of conformity: ✔
  • UK declaration of conformity: ✔
  • ACMA declaration of conformity: ✔
  • Moroccan declaration of conformity: ✔
  • China RoHS: ✔
  • cULus certificate: ✔
  • Information according to Art. 3 of Data Act (Regulation EU 2023/2854): ✔

Image is representative and may differ from the supplied item.

Download SICK product specification sheet (PDF)