Description
SICK 1037419 DFS60E-TEEK01024 Incremental encoders.
Safety-related parameters
- MTTFD (mean time to dangerous failure): 300 years (EN ISO 13849-1) 1)
1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Performance
- Pulses per revolution: 1,024 1)
- Measuring step: 90°, electric/pulses per revolution
- Measuring step deviation at binary number of lines: ± 0.15°
- Error limits: ± 0.3°
1) See maximum revolution range.
Interfaces
- Communication interface: Incremental
- Communication Interface detail: HTL / Push pull
- Number of signal channels: 6-channel
- Initialization time: 40 ms
- Output frequency: ≤ 300 kHz
- Load current: ≤ 30 mA
- Power consumption: ≤ 0.5 W (without load)
Electronics
- Connection type: Cable, 8-wire, universal, 1.5 m 1)
- Supply voltage: 10 ... 32 V
- Reference signal, number: 1
- Reference signal, position: 90°, electric, logically gated with A and B
- Reverse polarity protection: ✔
- Short-circuit protection of the outputs: ✔ 2)
1) The universal cable connection is positioned so that it is possible to lay it without bends in a radial or axial direction.
2) Short-circuit opposite to another channel, US or GND permissable for maximum 30 s.
Mechanics
- Mechanical design: Through hollow shaft
- Shaft diameter: 12 mm; Front clamp
- Weight (technical data): + 0.2 kg
- Shaft material: Stainless steel
- Flange material: Aluminum
- Housing material: Aluminum die cast
- Start up torque: 0.8 Ncm (+20 °C)
- Operating torque: 0.6 Ncm (+20 °C)
- Permissible movement static: ± 0.3 mm (radial); ± 0.5 mm (axial)
- Permissible movement dynamic: ± 0.1 mm (radial); ± 0.2 mm (axial)
- Operating speed: ≤ 6,000 min⁻¹ 1)
- Moment of inertia of the rotor: 40 gcm²
- Bearing lifetime: 3.6 x 10^10 revolutions
- Angular acceleration: ≤ 500,000 rad/s²
1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.
Ambient data
- EMC: According to EN 61000-6-2 and EN 61000-6-4
- Enclosure rating: IP65, housing side, cable connection (IEC 60529); IP65, shaft side (IEC 60529)
- Permissible relative humidity: 90 % (Condensation not permitted)
- Operating temperature range: 0 °C ... +85 °C
- Storage temperature range: –40 °C ... +100 °C, without package
- Resistance to shocks: 50 g, 6 ms (EN 60068-2-27)
- Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
Certificates
- EU declaration of conformity: ✔
- UK declaration of conformity: ✔
- ACMA declaration of conformity: ✔
- Moroccan declaration of conformity: ✔
- China RoHS: ✔
- cULus certificate: ✔
- Information according to Art. 3 of Data Act (Regulation EU 2023/2854): ✔
Image is representative and may differ from the supplied item.