Description

ProLine G2 Lifting Angle Side-to-Side, 2.99x4.25x2.00, Plated, Steel

Used to provide best load distribution while lifting two or three joined/ganged enclosures with up to 1000 lbs (453 kg) of equipment and cabling in each bay
Angles mount to top of enclosure frame corner blocks and do not require removal of top cover for installation.
Kit consists of two angles, four hex cap screws and four washers.
Lifting Angles are designed for overhead lifting in conjunction with shackles and a spreader bar. Use of shackles instead of hooks is preferred. The angle between the top of the enclosure and the cable or chain must be at least 45°. Use only slings and spreader bars that are designed for the specific application and are in compliance with regulations established by OSHA, ASME, ISA, ASTM and other governing agencies.

Lifting angles fasten into the steel corner blocks of a modular enclosure or joined modular enclosures to facilitate overhead lifting.