• A complete set of EZ-Load Glide Blocks is supplied with each full-height mounting subpanel; this set of four blocks serves as a replacement set
• Support subpanel installation vertically from the front, rear, or side, or can be used to load a subpanel while the subpanel is horizontal
• Glide blocks made from a high performing, glass re-enforced polymer, and consist of integrating front and rear sections
• All mounting hardware included; glide blocks secure to frame with BV-M6 fasteners, and to the subpanel with metric hex bolts
• For vertical front loading, the rear portion of the glide blocks can be attached to the frame prior to subpanel insertion to set a defined panel depth; the front portion of the glide blocks use the frame rails as a guide, gliding smoothly to the preferred depth
• For horizontal loading, the frame can be lowered over the mounting subpanel; in this configuration the load of the subpanel is in a safe, static state
• If the subpanel is used in the rear most position, the rear glide blocks will not be used, as the frame supports the subpanel
• If two subpanels are used in the enclosure in a back-to-back position the rear glide blocks will not be used

PRODUCT ATTRIBUTES

BULLETIN NUMBER