Product Overview
PoE Midspan, 8 Port, 10/100, 30W max per port (150W total power), 115VAC Input
Altronix NetWay8 Midspan injector provides power and passes data for PoE and PoE+ compliant cameras/edge devices. Cameras/edge devices may be located up to 100m from the NetWay unit. A NetWayXT (PoE) or NetWayXTX (PoE+) repeater module can be utilized to extend the distance an additional 100m for a total range of up to 200m. A maximum range of 600m is possible using multiple repeaters, based on camera/device port requirement. NetWay Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 or NetWay3012 adapters.
Input
115VAC 50/60Hz, 2A.
Primary fuse (internal) is rated at 5A/250V.
Power
Unit provides up to 30W max. full power per port.
Total power: 150W.
IEEE 802.3af (PoE) and IEEE 802.3at (PoE +) compliant.
Short circuit protection.
Functions
Auto detection and protection of legacy non-PoE cameras/edge devices.
Features
Easy plug and play installation.
Safe and cost effective power distribution over CAT5/5E/6 LAN infrastructure.
Automatic detection and protection of legacy non-PoE cameras.
Port status LED indicators.
Illuminated master power disconnect circuit breaker with manual reset (switch).
IEC 320 - 3-wire grounded line cord (detachable).
Temperature
Operating: - 20° C to 40° C ( - 4° F to 104° F).
Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity 85% +/- 5%.
BTU/Hr. (approx.): 77 BTU/Hr.
System AC input VA requirement: 230VA.
Operating Altitude: - 304.8 to 3,048m.
PoE Midspan, 8 Port, 10/100, 30W max per port (150W total power), 115VAC Input
Altronix NetWay8 Midspan injector provides power and passes data for PoE and PoE+ compliant cameras/edge devices. Cameras/edge devices may be located up to 100m from the NetWay unit. A NetWayXT (PoE) or NetWayXTX (PoE+) repeater module can be utilized to extend the distance an additional 100m for a total range of up to 200m. A maximum range of 600m is possible using multiple repeaters, based on camera/device port requirement. NetWay Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 or NetWay3012 adapters.
Input
115VAC 50/60Hz, 2A.
Primary fuse (internal) is rated at 5A/250V.
Power
Unit provides up to 30W max. full power per port.
Total power: 150W.
IEEE 802.3af (PoE) and IEEE 802.3at (PoE +) compliant.
Short circuit protection.
Functions
Auto detection and protection of legacy non-PoE cameras/edge devices.
Features
Easy plug and play installation.
Safe and cost effective power distribution over CAT5/5E/6 LAN infrastructure.
Automatic detection and protection of legacy non-PoE cameras.
Port status LED indicators.
Illuminated master power disconnect circuit breaker with manual reset (switch).
IEC 320 - 3-wire grounded line cord (detachable).
Temperature
Operating: - 20° C to 40° C ( - 4° F to 104° F).
Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity 85% +/- 5%.
BTU/Hr. (approx.): 77 BTU/Hr.
System AC input VA requirement: 230VA.
Operating Altitude: - 304.8 to 3,048m.
