Description
EoC 4 Port Adapter Kit, 100Mbps, Enables 4 IP Devices over Single Coax, Receiver Requires 51-56VDC, Includes Receiver and Transceiver/Switch
Altronix eBridge4SK kit consists of eBridge100SPR and eBridge4SPT Coax to CAT-5 Ethernet adapters/media converters that deliver data and power over coax cable. The paired set enables fast 10/100 Base-T Ethernet digital communication. eBridge4SPT allows to upgrade the existing infrastructure by replacing a single analog device with up to four (4) PoE/PoE+ devices. eBridge100SPR passes data and sends power over the coax to the eBridge4SPT. Data transmission and power over the Coax are possible up to 300m. Maximum range from headend to the PoE camera/device is 500m, taking into consideration that up to 100m of structured cable may be deployed at each end. eBridge4SK enables cost-effective system upgrades and eliminates the costs and labor associated with installing new network cabling.
Input
eBridge100SPR - 51-56VDC/60W @ max. power.
eBridge4SPT - powered by eBridge100SPR (included).
Power Output
eBridge4SPT: 4 ports PoE+ (30W) per port.
Total output power: 60W.
Ethernet
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair Cat-5 or better structured cable.
Distance: up to 100m.
Speed: 10/100BaseT, half/full duplex, auto negotiation.
Coax
Distance: up to 300m.
Connectivity: BNC, RG-59/U or similar.
Throughput is rated to pass 100Mbps from camera to receiver. With proper headend equipment multiple Megapixel cameras can be used.
LED Indicators
Blue LED - Coax link connection.
Green LED - Power (eBridge100SPR only).
Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
Environmental
Operating Temperature:
eBridge100SPR: - 40° C to 60° C ( - 40° F to 140° F).
eBridge4SPT: (60W): - 40° C to 75° C ( - 40° F to 167° F).
Storage Temperature:
60W: - 40° C to 75° C ( - 40° F to 167° F).
Humidity: 20 to 85%, non-condensing.
Operating Altitude
- 304.8 to 2000m ( -1000 to 6,561.7 ft.)
