Description
The WAGO 890-255 plug features 5-pole, Cod. B, 1,50 mm², gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 400 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 6 kV
- IEC Approvals — Rated current: 16 A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- Ratings per IEC/EN – Notes — Rated current (note): 13 A for 3-pole load; 10 A for 4- and 5-pole load
- Ratings per UL 1977 — Note for the US market: Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 5 A and voltages up to 600 V. For further information, please contact your local sales office.
- Ratings per UL 1977 — Rated voltage (UL 1977): 600 V
- Ratings per UL 1977 — Rated current UL 1977: 12 A
- Connection Data — Clamping units: 5
- Connection Data — Total number of potentials: 5
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool; Push-in
- Connection 1 — Nominal cross-section: 1.5 mm² / 16 AWG
- Connection 1 — Solid conductor: 0.25 … 1.5 mm² / 22 … 16 AWG
- Connection 1 — Solid conductor; push-in termination: 0.75 … 1.5 mm² / 20 … 16 AWG
- Connection 1 — Stranded conductor: 0.25 … 1 mm² / 22 … 18 AWG
- Connection 1 — Fine-stranded conductor: 0.25 … 1.5 mm² / 22 … 16 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 0.75 mm² / 22 … 20 AWG
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 0.75 mm² / 22 … 20 AWG
- Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 0.75 mm² / 20 AWG
- Connection 1 — Strip length: 9 mm / 0.35 inches
- Connection 1 — Number of poles: 5
- Connection 1 — Conductor entry direction to mating direction: 0 °
- Connection 1 — Coding: B
- Pin spacing: 4.4 mm / 0.173 inches
- Width: 23.6 mm / 0.929 inches
- Height: 11.7 mm / 0.461 inches
- Depth: 34.1 mm / 1.343 inches
- Use: Control technology
- Marking: 5 4 3 2 1
- Potential Marking: 5 4 3 2 1
- Mating force of a plug-in connection: approx. 20 … 70 N (depending on pole number)
- Retention force of a plug-in connection: Locked: > 80 N
- Unmating force of a plug-in connection: Unlocked: approx. 20 … 70 N (depending on pole number)
- Number of mating cycles: 200, without resistive load
- protection rating: IP20; IP40 when mated with strain relief housing
- Contact type (pluggable connector): Male connector/plug
- Connector (connection type): for conductor
- Mismating protection: Yes
- Locking lever: Can be retrofitted
- Locking of plug-in connection: Locking lever
- Color: gray
- Cover color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Copper or copper alloy; surface-treated
- Weight: 5.6 g
- Processing temperature: -5 … +40 °C
- Continuous operating temperature: -35 … +85 °C
- Note on continuous operating temperature: Insulating parts for temperatures ≤ 105 °C
Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.
Image shown is representative. Refer to the product specifications for the exact configuration.