Description
The WAGO 859-902 optocoupler module features Nominal input voltage: 5 VDC, Output voltage range: 24 … 260 VAC, Limiting continuous current: 0.5 A, 2-wire connection, zero-cross switching, Red status indicator, Module width: 6 mm, gray.
Specifications
- Nominal input voltage UN: 5 VDC
- Input voltage range (low level): 0 … 1 VDC
- Input voltage range (high level): 4 … 6.25 VDC
- Nominal input current at UN: 8 mA
- Circuit type: 2-wire connection; Zero-voltage switching
- Limiting continuous current: 0.5 A
- Peak output current: 30 A
- Nominal output voltage: 230 VAC
- Output voltage range: 24 … 260 VAC (50 … 60 Hz)
- Voltage drop: ≤ 1.2 VAC
- Leakage current at rated voltage: ≤ 1 mA
- Switching current (min.): 50 mA
- Turn-on time: ≤ 10 ms
- Turn-off time: ≤ 10 ms
- Switching frequency: 50 Hz / 60 Hz
- Status indicator: Red LED
- Rated Voltage: 300 V
- Type of circuits: Mains circuits
- Overvoltage category: III
- Pollution degree: 2
- Dielectric strength (control/load circuit) (AC, 1 min): 3.51 kVrms
- Insulation type (control/load circuit): Reinforced insulation (safe isolation)
- Insulation type (adjacent devices): Reinforced insulation (safe isolation)
- Insulation type (between adjacent devices of the same type): Reinforced insulation (safe isolation)
- Insulation type (to adjacent devices of different types): Reinforced insulation (safe isolation)
- protection rating: IP20; in connected state or when using 859-525 end plate
- Connection Data — Connection technology: CAGE CLAMP®
- Connection Data — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor; with insulated ferrule: 0.08 … 1.5 mm² / 28 … 16 AWG
- Connection Data — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
- Width: 6 mm / 0.236 inches
- Height: 91 mm / 3.583 inches
- Depth from upper-edge of DIN-rail: 56 mm / 2.205 inches
- Mounting type: DIN-35 rail
- Mounting position: horizontal (standing/lying); vertical
- Color: gray
- Weight: 15.4 g
- Ambient temperature (operation at UN): -25 … +55 °C
- Ambient temperature UL (operation at UN): -25 … +40 °C
- Ambient temperature (storage): -40 … +70 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 20 K)
- Relative humidity: 5 … 95 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Standards/specifications: EN 61010-2-201; EN 61000-6-2; EN 61000-6-3; UL 508
Image shown is representative. Refer to the product specifications for the exact configuration.