Description
The WAGO 859-360 relay module features Nominal input voltage: 115 VAC, 1 changeover contact, with gold contacts, Red status indicator, Module width: 6 mm, 2,50 mm², gray.
Specifications
- Nominal input voltage UN: 115 VAC/VDC
- Input voltage range: -15 … +10 %
- Nominal input current at UN: 4 mA
- Number of changeover contacts: 1
- Contact material (relay): AgNi + Au
- Limiting continuous current: 5 A
- Inrush current (resistive) max.: (AC) 20 A / 0.02 s
- Switching Voltage, Max.: 250 VAC
- Switching power (resistive) max.: AC 1250 VA; DC (see load limit curve)
- Utilization category: AC-15: 3 A / 250 VAC; DC-13: 2 A / DC 24 V
- Recommended minimum load: 1 V / 1 mA / 1 mW
- Pull-in time (typ.): 15 ms
- Drop-out time (typ.): 30 ms
- Bounce time (typ.): 3.5 ms
- Electrical life (NO; resistive load; 23 °C): 50 x 10³ switching operations
- Mechanical life: 5 x 10⁶ switching operations
- Switching frequency with/without load (max.): 6 min-1 / 180 min-1
- Status indicator: Red LED
- Rated Voltage: 300 V
- Rated impulse withstand voltage: 4 kV
- Overvoltage category: III
- Pollution degree: 2
- Dielectric strength (control/load circuit) (AC, 1 min): 4 kVrms
- Dielectric strength (open contact) (AC, 1 min): 1 kVrms
- Insulation type (control/load circuit): Reinforced insulation (safe isolation)
- Insulation type (adjacent devices): Reinforced insulation (safe isolation)
- protection rating: IP20; in connected state or when using 859-525 end plate
- Connection Data — Connection technology: CAGE CLAMP®
- Connection Data — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor; with insulated ferrule: 0.08 … 1.5 mm² / 28 … 16 AWG
- Connection Data — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
- Width: 6 mm / 0.236 inches
- Height: 91 mm / 3.583 inches
- Depth from upper-edge of DIN-rail: 56 mm / 2.205 inches
- Mounting type: DIN-35 rail
- Mounting position: Horizontal (standing/lying); vertical
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 25.1 g
- Ambient temperature (operation at UN): -40 … +50 °C
- Ambient temperature (storage): -40 … +70 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 20 K)
- Relative humidity: 5 … 95 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Standards/specifications: EN 61010-2-201; EN 61810-1; EN 61373; UL 508; DNV
Image shown is representative. Refer to the product specifications for the exact configuration.